Futrex 5000A/ZL, 5000A/WL, 5000/XL manual Color Printer, Function Mode

Page 29

COLOR PRINTER

The FUTREX-5000A/WL can directly communicate with an external printer without need for any external computer using Futrex's unique full color fitness forms. The following is required if you desire to use this feature:

!Preprinted Color Forms - This 4 page form provides extensive data for your clients.

!Printer - Epson Model LX-300

!RS-232 Serial Cable - To communicate from the FUTREX-5000A/WL to the Epson Printer. This printing function is performed as follows:

1)Turn both the printer and FUTREX-5000A/WL on. Wait for countdown to finish or press CLEAR. The RS-232 serial cable should be attached between the units.

2)Press SELECT PROGRAMS, then COLOR PRINTER. The FUTREX-5000A/WL internal printer will display: "Use Previous Data; 1 = YES, 2 = NO".

If you type in "NO" (i.e. "2"), follow the Fitness Analysis Procedure described on page 23 starting with Step 5.

3)If "YES" (i.e. "1") was typed in, the FUTREX-5000A/WL will use the data from the last person that was measured and the instrument's printer will ask:

!"Enter Activity Level" - This is the amount of daily physical activity the person does during normal work environment. It does not include any exercise program the person does. Enter either LIGHT (e.g. office work), MODERATE (e.g. someone delivering mail), or HEAVY (e.g. a ditch digger).

4)Enter "Body Frame" and "Activity Level" as described in the Fitness Analysis procedure (page 24, items 8 and 11).

CAUTION: Color Forms must be in printer.

FUNCTION MODE

NOTE: Printer must be set to 2400 bit rate (page 2-21 in Epson Users' Guide). If a malfunction occurs (e.g. paper jam), you must turn off both the printer and the FUTREX- 5000A/WL before restarting.

27

Image 29
Contents FUTREX-5000A/WL Body FAT and Fitness Computer Table of Contents Main Body Optical Standard Appearance and Part NamesLight Wand Printer Paper Installation Battery InstallationPreparation C AdapterPage FUTREX-5000/XL Models of the Futrex Body FAT and Fitness ComputerFUTREX-5000A/ZL FUTREX-5000A/WLTo Estimate Percent Body FAT Percent Body FAT MeasurementPage Page Page Standards Frequency Time Off Message To Repeat a MeasurementSelecting the Biceps Measuring Site Selecting the Triceps Measuring Site Selecting the Thigh Measurement Site During countdown press CLEAR, Select PROGRAM, Risks Adjusting the Percent Body FAT ReadingEstimating Relative FAT Distribution To Measure Another Site or Repeat a Measurement Self Measurement of Percent Body FAT Setting the Correct Date Page Fitness Analysis Printout ProgramsTo Obtain a Fitness Analysis Printout Press the Select Program KeyTo Print Another Fitness Analysis follow steps 3 through EnterTo Obtain an Update Analysis Printout Update AnalysisTo Print Another Update Analysis follow steps 3 through Color Printer Function ModeF1 Selection of English or Metric Units To Enter into the Function ModeF3 Use of Dotson-Davis Equations F2 Selection Calorie Limit ModeF4 Color Printer Selection Troubleshooting Problem Probable Cause Corrective Measures Page Problem Probable Cause Corrective Measures Problem Probable Cause Corrective Measures Measurement Technique General SpecificationsKey Name Keypad Description