Futrex 5000A/WL, 5000/XL, 5000A/ZL manual Problem Probable Cause Corrective Measures

PROBLEM	PROBABLE CAUSE	CORRECTIVE MEASURES
6) Print is too light or does not print.	a) Printing on wrong side of the	a) Make sure paper is inserted to
	paper.	print on the "shiny" side of the paper.
	b) Wrong type of printer paper.	c) Paper must be thermal paper.
	c) Print head is dirty.	b) Clean the print head by carefully
		removing the Paper Cutter. Insert a
		clean piece of rough paper (a typical
		business card is ideal) between the
		print head and rear paper roller.
		CAUTION: Do not bend the print
		head; pressure on the rear paper
		roller will allow the card to be
		inserted.
7) Printer prints black lines.	a) Low batteries.	a) Replace batteries (Refer to page
	b) Bad battery connections.	3).
		b) Remove batteries and clean tabs
		with isopropyl alcohol (rubbing
		alcohol).

!FOR MORE INFORMATION OR ASSISTANCE, CALL 1-800-545-1950 (USA) OR 1-301-733-9368 (International).

34