PREPARATION
1.Battery Installation
Insert 6 1.5V "AA" size alkaline batteries into the battery compartment located on the rear of the Main Body. Be sure the batteries are oriented as indicated in the battery compartment.
NOTE: Batteries must be alkaline type. Other types will not work.
2.Light Wand
Connect the Light Wand Cable to the connector jack located on the right hand side of the Main Body.
It is recommended that the Connector always remain attached to the Main Body. This will avoid possible damage to the connector.
3.A/C Adapter
Connect the A/C Adapter cable to the connector jack located on the right hand side of the Main Body (the jack closest to the top of the unit).
PRINTER PAPER INSTALLATION
3