GE 25880 manual Rings to Answer, Security Code

3.Press program/flash again to store your selection.You will hear a confirmation tone.

Rings to Answer

NOTE: This setting may only be made with the base.

You may set the number of times you want the phone to ring before the answering system answers a call.

1.Press the program/flash button until RINGTO ANSWER shows in the display. 5 is the default setting.

2.Use the caller ID (rev or skip) button to scroll to 3, 5 or TOLL.

NOTE: TOLL (Toll Saver) can save you the cost of a toll call when accessing your messages from another phone. If you have new messages, the unit answers after the 3rd ring. If you have no new messages, the unit answers after the 5th ring. You can hang up after the 3rd or 4th ring and save the pay telephone or long distance charge.

3.Press program/flash again to store your selection.You will hear a confirmation tone.

Security Code

NOTE: This setting may only be made with the base.

You can access the answering system from any tone dialing telephone in another location.The security code is required for remote access, and it prevents unauthorized access to your answering system.You may only change the security code at the base.

1.Press the program/flash button until SECURITY CODE shows in the display.

2.Use the touch-tone pad to enter your new 3-digit security code. For example, press the 6, 2, and 8 number keys for security code 628.The default security code is 123.

3.Press program/flash again to store your selection.You will hear a confirmation tone.

14