GE 25880 manual Dialing a Stored Number, Chain Dialing from Memory

Dialing a Stored Number

Handset: Make sure the phone is ON by pressing the talk/end/call back button on the cordless handset.

1.Press the memory/conference button.

2.Press the desired memory location button (0-9).The stored telephone number dials automatically.

-Or-

1.Make sure the phone is OFF (not inTALK mode).

2.Press the memory/conference button.

3.Press the desired memory location button (0-9), or use the caller ID/vol (- or +) button to scroll to the desired telephone number.

4.Press the talk/end/call back button.The stored telephone number dials automatically.

Base: Press the speaker/call back button, or lift the corded handset.

1.Press the memory/conference button.

2.Press the desired memory location (0-9).The number dials automatically.

-Or-

1.Make sure the phone is OFF (not in talk mode).

2.Press the memory/conference button.

3.Press the desired memory location button (0-9), or use the caller ID (rev or skip) button to scroll to the desired telephone number.

4.Press the speaker/call back button.The number dials automatically.

Chain Dialing from Memory

Use this feature to make calls that require a sequence of numbers, such as a frequently used long distance card number.The following example shows how you can store each part of the long dialing sequence and use chain dialing to make a call through a long distance service provider:

28