GE 25880 manual Storing a Redial Number, Inserting a Pause in the Dialing Sequence

Storing a Redial Number

1.Make sure the phone is OFF (not inTALK mode).

2.Repeat step 1 through 6 in Storing a Name and Number in Memory.

3.Press redial to display the redial number and name.

4.Press memory/conference again to confirm.

NOTE : If the number you want to redial has more than 24 digits, the telephone number cannot be stored in memory.

Inserting a Pause in the Dialing Sequence

Press the #pause button on the touch-tone pad twice to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or wait for a computer access tone.) Each pause counts as 1 digit in the dialing sequence.

Reviewing,ChangingorDeletingStoredNames/Numbers

To Review: Press memory/conference on the handset or on base, then press the caller ID (rev or skip) button (on base) or the caller ID/vol (- or +) button (on cordless handset) to scroll through the stored numbers. Or press the memory location number.

To Change: Follow the steps under Storing a Name and Number in Memory except replace the stored name or number with the new information.

To Delete: Press memory/conference on the handset or on base, then press the caller ID (rev or skip) button (on base) or the caller ID/vol (- or +) button (on cordless handset) to scroll to a desired memory.

1.While the entry displays, press delete button on base or del/chan button on handset to mark the entry for deletion.The display shows DELETE?

2.Press delete button on base or del/chan button on handset again to delete the entry. **DELETED** is displayed.

27