Motorola MD790 Series manual Setting the Date and Time, Scroll to Date/Time and select Select

Page 34

4Select FORMAT to scroll through the formats. Stop at the format you want to set for the area code, then scroll down to move to the next area code.

5Repeat steps 3 and 4 to store up to 4 more area codes. When you are finished, select DONE.

6Select EXIT to return to the standby screen, or scroll to a different menu option.

	Setting the Date and Time			Setting
	1	Select	MENU.	Setting
	1	Select	MENU.	Up
	2	Scroll to Date/Time and select SELECT.		Up
	2	Scroll to Date/Time and select SELECT.
	3	Enter the time. (two-digits are required for both
		hour and minutes, so use a leading 0 for 1-digit
		values.)
	4	If using a 12-hour clock, select AM/PM to switch
		between am and pm.
	5	Scroll down to move the next field.
	6	Select HANGE to change the time format (12 or 24
		hour clock). Scroll down to move to the next field.
	UNCONTROLLED
	7	Select	CHANGE to select date format
		(MM/	or DD/MM).
		DOCUMENT

8Scroll down to move the next field.

9Enter the current date. Set the day of the week on the base unit (only) by pressing CHANGE to scroll to desired listing.

10Select DONE.

11Select EXIT to return to the standby screen, or scroll to a different menu option.

18

Image 34

Contents Uncontrolleddocument Handset Overview WelcomeCongratulations on your purchase of a Motorola product Base Unit Controls Soft KeysDOCUMENTOr contact us at IiiWelcome Table of Contents UNCONTROLLEDUsing the Intercom Vii Important Safety Instructions ViiiDo not place this product on an unstable cart, stand With your dealer or local power companyDamage to the product Nearby persons On the bottom of this equipment is a label that contains FCC InformationAmong other information, a product identifier in the form Xii This equipment has been tested and found to comply This device complies with Part 15 of the FCC RulesOperation XiiiXiv Hearing Aid Compatibility Battery Safety Instructions Getting StartedCharging the Battery Rest the handset in the base so the charging Installing Backup BatteriesFor the initial charge, charge the battery for LED lightsReplace the compartment cover by inserting Base display has a battery meter to show statusBackup batteries Tabs of the cover into the slots on the base unitInstalling the Corded Handset When the speakerphone is on, V displays. GettingStarted Using the PhoneMain display UNCONTROLLEDUsing the Soft Keys Using the Navigation Key Installation Installing the Phone on a DeskInstalling the Phone on the Wall Uncontrolled Setting the Ring Volume Setting UpPersonalizing Your Phone Setting the Ring Tone On when the ringer is on, and off when the ringer Setting Key Beeps On or OffWhen your choice displays, press SE ECT Scroll through the options ON, FF, or Inked to RingerName base on base unit Scroll to Name handset using your handset Scroll toNaming Your Handset and Base Unit Enter the name you want to use up toUncontrolled First letter of the entry is an uppercase letter. oStoring Area Codes for Caller ID Scroll to Date/Time and select Select Setting the Date and TimeSelect Select Change to select date format Or DD/MMSetting the Language Setting Touch Tone or Pulse DialingEnding a Call Using the PhoneMaking a Call Answering a CallAdjusting the Volume During a Call UncontrolledUsing Automated Dialing Press DialTo adjust the speakerphone volume, press Using the SpeakerphoneWhen the speakerphone is on, Vappears on Use the speakerphoneRedialing a Number Muting a CallPutting a Call on Hold Finding a Lost or Misplaced HandsetPhoneUNCONTROLLED Select Phonebk Using the PhonebookStoring a New Number Enter the name up to 12 characters.Scroll down Storing a Recently Called Number Storing a Caller ID NumberEditing a Phonebook Entry Sorting the Phonebook Unsorted or reset to its previous list orderDeleting a Phonebook Entry Phonebook to sort entries alphabeticallyCopying a Phonebook Entry Calling a Number from the PhonebookReviewing the List of Caller ID Calls Using Caller IDHandset can store up to 40 Caller ID records Deleting Caller ID Calls Multihandset Functions Answer is displayed on your handset and paging stops Using the IntercomTo end an intercom session, press Enabling Auto-Answer After three ringsTransferring Calls to Other Handsets Conference CallingIntercom automatically pages the handset Monitoring a RoomHandset being monitored automatically answers Using the Answering Machine Turning the Answering Machine On or Off Setting Up the Answering MachineSetting Up Your Outgoing Message OGM Recording an utgoing MessageUsing this feature, if you call long distance to check Call after three rings when new messages are presentOr after five rings when there are no new messages Scroll to and select Ring NumberSetting Voice Prompts Setting the Security ID NumberRecording a Memo Setting Recording Quality Using the Answering MachineChecking Messages from the Base Unit UNCONTROLLED0 Erasedocument Machine Answering Checking Messages from a Cordless HandsetChecking Messages Remotely Message Forwarding Phone number you specified. When you answerWith Message Forwarding activated, the next time a Screening Calls Registering a New Expansion Handset New Expansion HandsetsDeregistering an Expansion Handset Press OK to register another handset, or press Exit Motorola Limited Warranty What Does this Warranty Cover?Exclusions Who is Covered What Other Limitations Are There? Mgbi