Operating Your Telephone
MEMORY STORAGE
Emergency Storage Buttons
Three emergency buttons are located on the handset. These storage buttons can be programmed with numbers of up to 16 digits.
Memory Storage Locations
The W425 also has 10 indirect or two touch memory locations on the telephone
To Store numbers into memory
1.Press the MEM button.
2.Dial the number you wish to store.
3.Press the MEM button again.
4.Press either the emergency button or the number on the dial pad that you wish to store the number to.
5.A long beep will indicate the programming process is complete.
During the memory storage process the TALK button will flash GREEN. In the event of a power outage memory is retained of at least six (6) hours.
To Change a Number Stored into Memory Replace a stored number by programming a new number in its place.
To Delete a Number Stored into Memory
1.Press and release the MEM button.
2.Press the * key once for each digit in the number you are deleting.
3.Press the MEM button again.
4.Press the button for the memory location you want to delete the number from.
18