Operating Your Telephone
E
Lighted Key Pad
The key pad will light for fifteen (15) seconds after removing from the base when there is an incoming call. To reactivate the feature while in standby or in use, press any key.
Page / Handset Locator
To send a page signal from the base to the handset, press the PAGE button located on the base of the telephone. A series of rings will sound from the handset.
To locate the handset if it is away from the base, press and hold the PAGE button for approximately five (5) seconds. A series of rings will sound for approximately sixty (60) seconds. Return the handset to the base or press the TALK button to cancel the page. Press TALK again to return to standby mode.
40 Channel Operation
The W425 cordless telephone automatically searches and selects the clearest of 40 channels when it is being used.
Security Code
The security code prevents your cordless phone from being accessed by a phone on a different line. Once the handset battery is fully charged, the handset will automatically select the code from over 65,000 combinations. The code is changed every time the handset is placed in the cradle.
If you have trouble with placing or receiving calls, a lost security code may be the cause of the problem. When this occurs, the handset can no longer communicate with the base. Reset by placing the handset on the base for
Hearing Aid Compatibility
The handset has a special coil inside
of it to couple the sound to hearing aids equipped with
N G L I S H
17