VTech dect 6.0 user manual Battery needs charging when

Page 82

Appendix

Battery

It takes up to 11 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation

Operating time

While in handset use (talking*)

Up to 7 hours

 

 

While in speakerphone mode (talking*)

Up to 3.5 hours

While not in use (standby**)

Up to 5 days

*Operating times vary depending on your actual use and the age of the battery.

**Handset is not charging or in use.

The battery needs charging when:

A new battery is installed in the handset.

The handset beeps every 50 seconds while on a call.

The handset beeps and Low battery displays on the handset.

Put in charger displays on the handset.

A battery is properly installed and the screen is blank.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

Use only the batteries provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

Do not dispose of the batteries in a fire. Check with local waste management codes for special disposal instructions.

Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

Exercise care in handling batteries in order not to create a short circuit with conductive materials.

Charge the batteries provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

Observe proper polarity orientation between the battery and metallic contacts.

To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

78

Image 82
Contents Complete user’s manual Registration Product newsTable of contents Appendix Answering system settingsCaller ID Index Answering system operationParts checklist Getting startedTelephone base and charger installation Battery installation If you do not hear a dial toneBattery charging Displays Put in chargerInstallation options Tabletop to wall mount installationGetting started Wall mount to tabletop installation See Telephone base and charger installation onTo use the built-in answering system Are you a new cable or VoIP subscriber?To use the voicemail Telephone base layout ANS ON/OFFMENU/SELECT Cancel REDIAL/PAUSE Handset layout Charge light CellMUTE/DELETE Bluetooth Introducing BluetoothBluetooth Glossary of terms Bluetooth setup VTech Connect to Cell applicationAdd a cell phone To pair and connect a cell phoneReview the cell device list Auto connectionDownload directory To download a cell phone directoryHandset ringer volume Telephone settingsUsing the menu To enter the menuRinger tone Telephone base ringer volumeRinger off To set the duration and turn on the quiet mode Quiet modeTo turn off the quiet mode Set date and time LCD language Press Select to choose LCD languageVoicemail number To set your voicemail numberClear voicemail indicators To manually turn off the new voicemail indicatorsKey tone Home area codeDial mode Predial a home call Telephone operationMake a home call Answer a home callCall waiting on the home line End a home callMake a cell call Answer a cell call Predial a cell callEnd a cell call Cell phone voicemail Call waiting on the cell lineAnswer a cell call while on a home call Answer a home call while on a cell callVolume MuteTemporary tone dialing Handset speakerphoneTemporary ringer silencing To silence the handset ringerTo delete a redial entry RedialTo review and dial a redial entry Press /HOME or to use the home lineTo access a number on the redial list To access a number in the directoryTo access a number in the caller ID log Check voicemailTransfer a call To start paging Find handsetWeb address To end pagingJoin a call in progress Multiple handset useTo share an outside call Base IntercomTo initiate an intercom call with a handset Calling base or Calling HSTo initiate an intercom call at the telephone base To answer on a handset Answer an incoming call during an intercom callTo answer at the telephone base Directory About the directoryAdd a directory entry Press Select to choose Add contactDirectory Alphabetical search Review and dial from the directoryTo start an alphabetical search Edit a directory entry Review and dial from the directory or Alphabetical search onTo delete one entry Delete directory entriesTo delete all entries Speed dial Assign a speed dial entryReassign a speed dial entry Dial a speed dial numberDelete a speed dial entry About caller ID Caller IDInformation about caller ID with call waiting Missed call indicator Caller ID logHome or Cell to Memory matchReview and dial from the caller ID log Cell orView dialing options Save a caller ID log entry to the directory To delete an entry Delete the caller ID log entriesCaller ID log screen messages Displays WhenAnnouncement Answering system settingsAnswering system Record your own announcementPlay the announcement Delete your announcementTo turn on or off with the telephone base Answer on/offTo turn on or off with a handset or the telephone base Call screening To turn this feature on or offNumber of rings Remote access code Message alert toneRecording time Answering system operation Using the answering system and voicemail togetherAnswering system and voicemail Message capacity New message indicationTo screen a call at the telephone base Call interceptMessage playback To screen a call at a handsetTo play messages with a handset To play messages at the telephone baseOptions during playback To delete all messages with a handset or the telephone base Delete all messagesRecord, play or delete memos To record a memoRemote access Command DescriptionAdd and register a handset AppendixExpand your telephone system To register a handsetReplace a handset To deregister all handsetsKeystroke table Dialing Characters by number of key presses KeyScreen messages Appendix Handset lights Handset and telephone base indicatorsTelephone base lights Handset icons Telephone base iconsBattery Battery needs charging whenCannot connect my cell phone with the telephone base TroubleshootingCannot add my cell phone to the telephone base Cannot find VTech DS6751 on my cell phonePIN on the telephone base does not work Listening volume of my cell call is too loud or quietMy cell phone disconnects with the telephone base Cannot download contacts from my cell phone to the DS6751There is no dial tone My telephone does not work at allCannot dial out My cordless handset isn’t performing normally Low battery shows on the handset screenCharge light is off Telephone does not ring when there is an incoming call Appendix Hear noise on the cordless handset and the keys do not work Hear other calls when using the telephoneMy caller ID features are not working properly Telephone does not receive caller ID while on a callNew voicemail display and I don’t know why Out of range or no pwr at base shows on the handset screenCannot retrieve voicemail messages Answering system does not record messages Answering system does not respond to remote commandsOutgoing announcement is not clear Messages on the answering system are very difficult to hearCommon cure for electronic equipment Important safety instructions ECO mode Precautions for users of implanted cardiac pacemakersOperating range Energy-saving charging mode MaintenanceAbout cordless telephones Rbrc sealLimited warranty What does this limited warranty cover?How do you get warranty service? FCC, Acta and IC regulations FCC PartTechnical specifications Industry CanadaIndex Index All rights reserved. Version 1 09/13 91-007335-010-100