Telephone operation
End a home call
Using a handset:
•Press OFF or put the handset back in the telephone base or handset charger.
Using the telephone base:
•Press 
/HOME.
Call waiting on the home line
When you subscribe to call waiting service from your telephone service provider, you hear a beep if someone calls while you are already on a call.
•Press FLASH to put your current call on hold and take the new call.
•Press FLASH at any time to switch back and forth between calls.
Make a cell call
Using a handset:
1.Press 
/CELL. The handset displays Select a device.
•If you have only one cell phone connected to the telephone base, press SELECT and then the handset displays D1 selected.
•If you have two cell phones connected to the telephone base, press 
or 
to select a cell phone and then press SELECT. Then the handset displays D1/D2 selected.
2.Enter the telephone number, then press 
/CELL to dial.
Using the telephone base:
1.Press 
/CELL on the telephone base. The screen displays Select a device.
•If you have only one cell phone connected to the telephone base, press SELECT, the screen displays Enter number.
•If you have two cell phones, press 
or 
to select a cell phone and then press SELECT, the screen displays Enter number.
2.Enter the telephone number, then press 
/CELL or SELECT to dial.
•The screen shows the elapsed time as you talk (in hours, minutes and seconds).
•While entering numbers, press and hold PAUSE to insert a dialing pause (a P appears).
•While using the cell line, place your cell phone closer to the telephone base, and make sure that there are no physical obstacles such as large furniture or thick walls between the telephone base and the cell phone.
31