VTech CS6124-2 user manual Key tone, Set date and time, To change the setting, CID or

Page 13

Telephone settings

Key tone

You can turn the key tone on or off.

1.Press MENU/SELECT when the handset is not in use.

2.Press CID or until the screen displays Settings, then press MENU/SELECT.

3.Press CID or until the screen displays Key tone, then press MENU/SELECT.

4.Press CID or to choose On or Off, then press MENU/SELECT to confirm your selection. You hear a confirmation tone.

Set date and time

Settings

Key tone

On

The answering system announces the date and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. However, the year must be correct so that the day of the week can be calculated from the caller ID information.

To change the setting:

1. Press MENU/SELECT when the handset is not in use.

2. Press CID or until the screen displays Settings, Settings then press MENU/SELECT.

3.	Press CID or	until the screen displays
3.	Press CID or	until the screen displays
	Set date/time, then press MENU/SELECT.
	Set date/time, then press MENU/SELECT.
4.	When the month is flashing, press			CID or	until the
4.	When the month is flashing, press			CID or	until the			Set date/time
	screen displays the correct month and then press
	MENU/SELECT; or, press the dialing keys (0-9) to enter the
	current month (for example, if the month is March, you
	must enter 03).
	must enter 03).
5.	Repeat step 4 to set the correct date and year and then					Date: 03/25/10
	press MENU/SELECT to advance to time setting.
6.	When the hour is flashing, press			CID or	until the
6.	When the hour is flashing, press			CID or	until the
	screen displays the correct hour and then press
	MENU/SELECT; or, press the dialing keys (0-9) to enter the
	MENU/SELECT; or, press the dialing keys (0-9) to enter the					Time: 02:35 PM
	current hour (for example, if the time is two o’clock, you
	must enter 02).
7.	Repeat step 6 to set the correct minute. When AM or PM
	is flashing, press	CID or	to select AM or PM. Press
	is flashing, press	CID or	to select AM or PM. Press

MENU/SELECT to save your settings. You hear a confirmation tone.

• If the date and time are not set when a message is recorded, the system announces, “Time and date not set,” before each message plays.

•When there is a power failure or after battery replacement, the date and time need to be reset.

Image 13

Contents Online user’s manual Congratulations Table of contents Index Appendix Display screen messagesGetting started Parts checklistWall mounting optional Telephone base and charger installationBattery charging Battery installationBattery Displays Place in chargerCharge light Handset layoutDialing keys MENU/SELECT USE light Telephone base layoutMessage window Using the menu Telephone settingsRinger volume telephone base Ringer volume handsetLCD language To manually turn off these indicatorsClear voicemail To select a languageKey tone To change the settingSet date and time CID orHome area code Dial modeWebsite Telephone operation Temporary tone dialing Temporary ringer silencingFind handset To access a number in the call log while on a call To access a number in the directory while on a callMultiple handset use for models CS6120-2 and CS6124-2 only Chain dialingReview and dial from the redial list Redial listDelete a redial entry DirectoryAdd a directory entry Alphabetical search Review and dial from the directoryTo start an alphabetical search Review. Press MENU/SELECT againDelete a directory entry Edit a directory entryCall log About caller IDInformation about caller ID with call waiting Memory match Missed call indicatorReview and dial from the call log Save a call log entry to the directory View dialing optionsCall log display screen messages Delete the call log entriesDel all calls Displays WhenAnswering system setup Answering system settingsAnswer ON/OFF Call screeningNumber of rings Remote access codeMessage alert tone Announcement Recording timeRecord your own announcement Press MENU/SELECT to select AnnouncementPlay or delete your own announcement Answering system and voicemail Answering system operationMessage capacity Call intercept New message indicationMessage playback To play messages with the telephone baseRecord, play or delete memos Delete all messagesTo delete all messages with the telephone base To delete all messages with a handsetWindow display Description Message window displaysCommand Function Remote accessDisplay screen messages AppendixHandset screen icons Handset and telephone base indicatorsHandset light Telephone base lightBattery needs charging when BatteryMy telephone does not work at all TroubleshootingThere is no dial tone Cannot dial outTelephone does not ring when there is an incoming call Low battery shows on the handset screenCharge light is off My handset beeps and is not performing normallyHear noise on the cordless handset and the keys do not work My caller ID features are not working properlyOut of range or no pwr at base shows on the handset screen Cannot retrieve voicemail messagesAnswering system does not record messages Outgoing announcement is not clearCannot hear any messages from the handset Messages on the answering system are very difficult to hearCommon cure for electronic equipment Answering system does not respond to remote commandsImportant safety instructions Maintenance Precautions for users of implanted cardiac pacemakersOperating range Rbrc seal About cordless telephonesWhat does this limited warranty cover? Limited warrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Technical specificationsIndex Index All rights reserved. Version 6 10/11

Related manuals

Manual 53 pages 33.77 Kb