VTech CS6124-2 user manual Battery needs charging when

Page 37

Appendix

Battery

It takes up to 16 hours for the battery to be fully charged.. When it is fully charged, you can expect the following performance:

Operation	Operating time

While in use (talking*)	Seven hours

While not in use (standby**)	Five days

*Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.

The battery needs charging when:

•A new battery is installed in the handset.

•The handset beeps every 50 seconds while on a call.

•The handset beeps and Low battery displays on the handset.

•Place in charger displays on the handset.

•A battery is properly installed and the screen is blank.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

•Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

•Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special disposal instructions.

•Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

•Exercise care in handling batteries in order not to create a short circuit with conductive materials.

•Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

•Observe proper polarity orientation between the battery and metallic contacts.

•To prevent fire or shock hazard, do not expose this product to water or any type

of moisture.Appendix

33

Image 37

Contents Online user’s manual Congratulations Table of contents Index Appendix Display screen messagesGetting started Parts checklistWall mounting optional Telephone base and charger installationBattery charging Battery installationBattery Displays Place in chargerCharge light Handset layoutDialing keys MENU/SELECT USE light Telephone base layoutMessage window Using the menu Telephone settingsRinger volume telephone base Ringer volume handsetLCD language To manually turn off these indicatorsClear voicemail To select a languageKey tone To change the settingSet date and time CID orHome area code Dial modeWebsite Telephone operation Temporary tone dialing Temporary ringer silencingFind handset To access a number in the call log while on a call To access a number in the directory while on a callMultiple handset use for models CS6120-2 and CS6124-2 only Chain dialingReview and dial from the redial list Redial listDelete a redial entry DirectoryAdd a directory entry Alphabetical search Review and dial from the directoryTo start an alphabetical search Review. Press MENU/SELECT againDelete a directory entry Edit a directory entryCall log About caller IDInformation about caller ID with call waiting Memory match Missed call indicatorReview and dial from the call log Save a call log entry to the directory View dialing optionsCall log display screen messages Delete the call log entriesDel all calls Displays WhenAnswering system setup Answering system settingsAnswer ON/OFF Call screeningNumber of rings Remote access codeMessage alert tone Announcement Recording timeRecord your own announcement Press MENU/SELECT to select AnnouncementPlay or delete your own announcement Answering system and voicemail Answering system operationMessage capacity Call intercept New message indicationMessage playback To play messages with the telephone baseRecord, play or delete memos Delete all messagesTo delete all messages with the telephone base To delete all messages with a handsetWindow display Description Message window displays Command Function Remote accessDisplay screen messages AppendixHandset screen icons Handset and telephone base indicatorsHandset light Telephone base lightBattery needs charging when BatteryMy telephone does not work at all TroubleshootingThere is no dial tone Cannot dial outTelephone does not ring when there is an incoming call Low battery shows on the handset screenCharge light is off My handset beeps and is not performing normallyHear noise on the cordless handset and the keys do not work My caller ID features are not working properlyOut of range or no pwr at base shows on the handset screen Cannot retrieve voicemail messagesAnswering system does not record messages Outgoing announcement is not clearCannot hear any messages from the handset Messages on the answering system are very difficult to hearCommon cure for electronic equipment Answering system does not respond to remote commandsImportant safety instructions Maintenance Precautions for users of implanted cardiac pacemakersOperating range Rbrc seal About cordless telephonesWhat does this limited warranty cover? Limited warrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Technical specificationsIndex Index All rights reserved. Version 6 10/11

Related manuals

Manual 53 pages 33.77 Kb