IP Office IP Phones: File Auto Generation
1.16 Control Unit Memory Card
The memory card used with the Small Office Edition and IP406 V2 systems can be used to store files other than those used for embedded voicemail.
∙
∙If an Avaya supplied memory card is used, any files stored in this way will reduce the message storage capacity of the Compact Flash memory card.
Transferring Files to the Card Using File Management
IP Office 4.2+ allows the contents of the memory card in a system to be viewed and updated. This is done using IP Office Manager and requires the same user name and password access as used for configuration changes.
1.Within IP Office Manager, select File Advanced Embedded File Management.
2.The Select IP Office discovery menu is shown. Select the IP Office systems whose memory card you want to view and click OK.
3.Enter a user name and password for configuration access to that system.
∙TFTP: Received TFTP Error "Not Found" in the Manager status bar indicates that no card was detected in the selected system. To select another system use File Open File Settings. To return Manager to normal configuration mode select File Configuration.
4.The contents of the card are shown in Manager.
∙For IP Office 5.0+, all the phone firmware files can be transferred by selecting File Upload Phone Files. This will automatically select the phone firmware files that Manager has available and transfer them to the memory card.
∙New files can be drag and dropped to the Files section of the currently selected folder or transferred using File Upload File....
∙The transfer is serial and can be interrupted by other activities on the IP Office system. Therefore it is recommended that files are transferred in small batches.
∙Existing files can be deleted by
∙Files can be downloaded from the card by
5.When transfers have been completed, to select another system use File Open File Settings. To return Manager to normal configuration mode select File Configuration.
Transferring Files to the Card Using TFTP
This process allows a specified PC to send files to the memory card and tells the IP Office system to use the memory card. The location of the bin files should be the top level folder of the card.
1.Using Manager, receive the IP Office system's configuration.
2.On the System tab of the System form, set the File Writer IP Address to the IP address of the PC from which sending files to the memory card will be allowed.
3.Send this configuration back to the IP Office unit and allow it to reboot.
4.Within Windows, select Start Run.
5.Enter cmd and then click OK.
6.Within the command window, you can use TFTP to upload files to the memory card. For example:
c:\tftp
7.The above command will send the file d:\IPSets Firmware\4601dbtel1_82.bin to the IP Office units LAN1 IP address. For additional information about the TFTP command, enter TFTP. If a destination needs specifying, the memory card is treated as the IP Office's drive a:.
8.Receive the IP Office system's configuration again.
9.On the System tab of the System form, set the TFTP Server IP Address to the unit's own LAN1 IP address.
10.Send this configuration back to the IP Office unit and allow it to reboot. The IP Office system will now look on the memory card for any files it needs to download following a reboot.
11.If in future an upgrade or file transfer from the Manager PC is required, the TFTP Server IP Address will first need to be changed back to the Manager PC's IP address.
H323 Phone Install | Page 25 |
IP Office 4.2 |