Installation:
5.o DHCP Server
If not using the IP Office for DHCP, check that the alternate DHCP server has been configured for the IP phones. It will need to include details of the files server and gateway settings. See Alternate DHCP Setup 70 . If using the IP Office for DHCP, select System and then the LAN1 or LAN2 tab.
∙o DHCP Mode
Check that the IP Office is set as Server. This allows it to respond to DHCP requests on its subnet.
∙o Number of DHCP IP Addresses
Set this to a number sufficient for all the IP devices, including phones, that will be supported by the IP Office DHCP.
∙o Advanced/DHCP Pools (IP500 4.2+)
For IP Office 4.2+ on IP500 systems, multiple ranges of IP addresses can be configured for use by IP Office DHCP. In addition, the IP Office DHCP can be restricted to Avaya IP phones only by selecting Apply to Avaya IP Phones Only.
6.o IP Phone Software and Settings Files
The software for IP phone installation is supplied on the IP Office Administrator Applications CD. Those files must be placed on the file server. The files are automatically installed as part of the IP Office Manager application and so are already present if IP Office Manager is used as the file server.
∙If another source is used as the file server, the software and settings files must be copied to that server. For
∙If it does not exist already an additional file, 46xxsettings.txt, is also required. See Creating a 46xxsettings. txt File 30 .
7.o Extension Number and User Name Details
A full listing of the planned extension number and user name details is required. The planned extension number must be unused and is requested by the phone during installation.
H323 Phone Install | Page 29 |
IP Office 4.2 |