Avaya H323 manual QOS Option Settings, Secondary Ethernet Hub/IR Interface Enable/Disable

Page 55

Static Administration Options:

4.1 QOS Option Settings

Administering QoS options is not mandatory, but it is highly recommended. Use the following procedure to set Quality of Service (QoS) options.

1.While the phone is on-hook and idle, press the following sequence: MUTE 7 6 7 # (MUTE Q O S #).

2.The current 802.1Q settings are shown in sequence:

L2 audio=

This is the phone's current 802.1 audio parameter. To accept the current value, press # or enter a value (between 0 and 7) and then press #.

L2 signaling=

This is the phones 802.1 signaling parameter. To accept the current value, press # or enter a value (between 0 and 7) and then press #.

L3 audio=

This is the phone's Differential Services audio parameter. To accept the current value, press # or enter a value (between 0 and 63) and then press #.

L3 signaling=

This is the phone's Differential Services signaling parameter. To accept the current value, press # or enter a value (between 0 and 63) and then press #.

3.If no new values were entered during this procedure, No new values is displayed. To end the procedure, press #.

4.If new values were entered during this procedure, Save new values? is displayed. To end the procedure or save the new values, press #. New values being saved is displayed and the phone returns to normal operation.

4.2Secondary Ethernet (Hub)/IR Interface Enable/Disable

Use the following procedure to enable or disable the hub interface found on some H323 IP phones (usually marked with a symbol). The default for the hub interface is enabled.

The same procedure can also be used to enable or disable the IR port found on some H323 IP phones, see Infrared Dialling 66 .

1.While the phone is on-hook and idle, press the following sequence: MUTE 4 6 8 # (MUTE I N T #). The phones port settings are shown in sequence. The option vary between different models of phone.

PHY2=

This is the PC connection LAN socket marked as on the phone. Press 1 or 0 to enable or disable the hub interface respectively. To continue, press #.

IR=

This is the infrared (IR) port located on the front of some H323 IP phones. Press 1 or 0 to enable or disable the hub interface respectively. To continue, press #.

2.If you changed the setting, Save new values? is displayed. To end the procedure or save the new values, press

#. If you press #, New values being saved is displayed and then returns to normal operation.

H323 Phone Install

Page 55

IP Office 4.2

15-601046 Issue 15b (16 July 2009)

Image 55
Contents IP Office H323 IP Telephone InstallationH323 Phone Install IP Office Contents Page Chapter IP Office IP Phones Page IP Office IP Phones ∙ Dhcp versus Static IP Installation∙ Network Assessment IP Office What is New∙ IP500 Dhcp Enhancements ∙ Http User Backup and Restore∙ IP Phone Restart using System Status Application ∙ Secondary Site Specific Options NumberH323 IP Supported IP Office Core Phones Models Software Supported PhonesIP Office Unit System CapacityExtension Capacity Call CapacityPhone Firmware Simple Installation Complex Installation Installation Requirements ∙ Warning a Network Assessment is Mandatory Network Assessment∙ G711 20ms ∙ G723a 80ms ∙ G729 40ms Voice Compression Installing VCM CardsIP500 VCM cards IP400 VCM Cards10 QoS Potential VoIP Problems232 IP With Supports Phone User PC Connection∙ Gigabit Ethernet ∙ Avaya 1151D1 Power Supply Unit PSU Power Supply OptionsSpare Wire Power Options Dedicated Plug-Top Power Supply UnitsPhone 802.3af Class 802.3af Power over Ethernet PoE Options∙ Avaya 1152A1 Power Distribution Unit Mid-Span Power Unit ∙ Power of Ethernet POE Switch3rd Party Software File Server OptionsIP Office Manager IP Office Unit Memory CardFile Auto Generation Transferring Files to the Card Using Tftp Transferring Files to the Card Using File ManagementControl Unit Memory Card Page Chapter Installation Installation ∙ o Number of Dhcp IP Addresses ∙ o Dhcp ModeIP Phone Software and Settings Files Dhcp ServerCreating/Editing the Settings File Installation Creating/Editing the Settings File Backup/RestoreManually Creating Extensions Phone Connection ∙ To switch to static address installationStatic Address Installation Phone Registration ∙ Password =∙ Ext. = Phone Security Extension & User SetupSpecifying the Bruri Value Backup RestoreHttp Authentication Manual Backup/Restore ControlField Description Series Phone Backup FileSelect Properties Http Server Configuration for Backup/RestoreListing Registered Phones Error Messages Page Chapter Other Installation Options VPN Remote Phones Other Installation OptionsProduct Section Title Doc Reference Installation DocumentationSupported VPNremote Phone Firmware Licensing VPNremote Phones on IP OfficeEnable VPN Phone Allowed Configuring the IP Phone for VPNremoteType Description Advantages Disadvantages Vlan and IP PhonesVlan and Dhcp Option Data Vlan Dhcp Settings Voice Vlan Dhcp SettingsDhcp Option Description HP-Switch Configuration Example setup OverviewPort Vlan Description Voice Data HP Procurve CLI outputOption Value Example System OverviewPort Vlan 209 Voice Vlan 210 Data Page Chapter Static Administration Options ∙ 4601, 4602, 5601, 5602 Speaker key Static Administration OptionsEntering Data for Administrative Options Hold vs MuteSecondary Ethernet Hub/IR Interface Enable/Disable QOS Option SettingsView Details ∙ If self-test passes Self-Test Procedure∙ If self-test fails Resetting a Phone Resetting a PhoneClearing a Phone Setting the Sson on IP Office Setting the Sson on an IP PhoneSite Specific Option Number ∙ Headset AGC = Switching automatic gain control on/offAutomatic Gain Control ∙ Handset AGC =Chapter Restart Scenarios Restart Scenarios Correct Boot File and Application File Already Loaded Boot File Needs UpgradingNo Application File or Application File Needs Upgrading Page Chapter Infrared Dialling ∙ Dial a Number to Start a Call Infrared Dialling∙ Swap Text Files During a Call Windows Pocket PC Enabling the IR PortDialling Phone Numbers Palm OrganizerBeaming Files During a Call Chapter Alternate Dhcp Server Setup Alternate Dhcp Server Setup Checking for Dhcp Using a Windows Dhcp ServerWindows Dhcp Setup for H323 IP Phones Select Start Programs Administrative Tools Dhcp∙ Data type String ∙ Code 2b. Adding a 242 Option2c. Adding a 176 Option Alternate Options Chapter WML Server Setup What WML is Supported WML Server SetupIntroduction Testing 4620 WML Browsing Using XitamiInstalling the Web Server Configuring the Xitami Web Server for WAP4a. Creating a Simple WML Installing Sample WML PagesSET Wmlport Setting the HomeMicrosoft IIS Web Server WML Configuration Apache Web Server WML Configuration∙ Associated extension wml Case 3. Input Box Followed by a Submit Button Open URL EntryCase 1. Input Box Followed by an Anchor Tag Case 2. Input Box Followed by an a TagPage Index H323 Phone Install IP Office Issue 15b 16 JulyAvpp Conflict END of Avaya 4620 IP Phone VCM L2QVLAN PWB SN Sson SET Dnssrvr SET Domain Tftpdir Vlanid Vlantest 47 H323 Phone Install IP Office Tel +44 1707 Fax +44