described in the following section. After all parties are connected, you can hang up, leaving the remaining two parties connected. See your system administrator for more information.
Conferencing Calls
The 9133i phone system supports up to 3 parties (including yourself) in a conference call.
To create a conference call:
1.Connect to the first party you wish to include in the conference (if not already connected).
2.Press 
. A new line opens.
3.Enter the extension number, or dial the outside number of the person you wish to add to the conference.
4.Wait for the new party to answer. You can consult with the new party first before adding them to the conference.
5.To add the new party to the
conference, press 
again.
6.To drop a party from the
conference, press 
once more.
You can use the 
keys to scroll through and see the numbers and names (if available) of the parties in the conference call.
To conference two calls you are already connected to:
1.Begin with active calls on two different lines.
2.Press 
. A new line opens.
3. | Press the line key of the call | |
|
| HandlingCalls |
| you wish to conference | |
| with. |
|
4. | Press | again. The |
two lines link into a conference call.
NOTE: When a | name | is |
displayed, pressing | drops | the |
displayed party from the call.
Ending Calls
To end a call, you first need to reconnect to the call if not already connected (for example, if your caller is on hold). Press
the 
button to end the call. If connected through the handset, you can also place the handset back on hook to end the call.
10