Aastra Telecom SIP9133i Getting Started, Start up Screens, When You First Plug in Your Phone

Page 6

Getting Started

This section describes phone behaviour and start up screens you may see when the 9133i phone is first plugged in, or when it is restarted.

When You First Plug in Your Phone

The 9133i automatically begins the start up sequence as soon as it is connected. The phone goes through this process the first time you plug in your phone and every time you restart your phone. The first screen the phone displays is the Aastra splash screen.

Updating Your Phone

After displaying the Aastra splash screen, the 9133i checks settings and looks for new configuration and firmware updates for the phone from the server. If a new update is found, the phone displays the message <Updating Config> or <New Firmware>. This may take a few moments while the phone downloads the latest updates.

NOTE: New updates to your phone can be automatically scheduled from the server. This is set up on the phone system by your system administrator and should be scheduled during non-business hours or slow call periods.

Important! Do not unplug or remove power to the phone while it is checking or installing firmware.

Start up Screens

 

 

Getting

After the phone displays the Aastra

 

splash screen or after downloading an

 

update, the phone displays the Idle

 

State screen:

 

 

Started

The basic Idle State screen lists your

 

name, extension, and today's date and

 

time. This screen is shown whenever

 

 

your phone is not in use.

 

 

 

Incomplete Config.

 

 

 

If your phone displays a <No

 

Service>

message

without

any

 

extension or user name at the end of the

 

start up sequence instead of the Idle

 

State screen, this means your system

 

administrator has not set up your

 

extension

correctly.

Contact

your

 

system administrator for assistance.

No Service

The <No Service> or <Network Disconnected> prompt appears on the display and the telephone status light turns on when the phone is not properly connected to the network, or the account has not been configured by the administrator. The phone also displays the default time and date of 12:00am Jan 1st, 2000. Check that the cables are tightly connected to the phone and to the wall jack. The phone should automatically detect when the connection is reconnected and

will display the <Network Connected> prompt temporarily. If changes have been made to your phone settings, you may need to restart your phone. See the following section “Setting Your Options” for instructions on how to restart your phone.

2

Image 6
Contents SIP 9133i IP Phone User Guide Page Table of Contents Page Introduction Start up Screens When You First Plug in Your PhoneGetting Started Updating Your PhoneSetting Your Options Options listRestart Phone option Hard Keys Using the 9133i PhoneUsing Your Phone Navigation Arrow KeysMultiple Line Call AppearancesMultiple Line and Call Appearances Advanced Volume Controls for the Headset Mic Using Handsfree SpeakerphoneUsing a Headset Making CallsMaking Calls Making and Receiving Calls Using HeadsetAccessing the Redial List RedialHandling Calls Receiving CallsReceiving Calls Placing a Call on HoldTransferring Calls When on HoldAutomatic Hold Blind TransferTo create a conference call Ending CallsConferencing Calls To conference two calls you are already connected toDirectory List Accessing Your DirectoryManaging Calls To the DirectoryDeleting Items from Directory Callers ListEditing in Directory To delete items one by oneEditing in the Callers List Accessing the Callers ListCalls Caller’s List Screen DisplayDo Not Disturb DND Programmable KeysDeleting from the Callers List Programming a Speed Dial KeyDeleting Programmable Key Items from Memory Aastra 9133i Web ClientEditing a Programmable Key Saving from Hard keys to programmable keys∙ Programmable keys ∙ Password ∙ Restart Aastra Web ClientPassword ConfirmSummary