AT&T ATTCL82201 Intercom, Shows Calling other handset, Calling Handset X or Calling all handsets

Page 32

Multiple handset use

Intercom

Use the intercom feature for conversations between 2 handsets. This feature is only available if you have at least 2 system handsets. Intercom is not available for the CL82101 model. You can buy accessory handsets (AT&T model CL80101) to expand your system.

Use a handset to initiate intercom calls and transfer calls.

 

 

Calling

1. Press MENU/SELECT in idle mode to enter the main menu.

HANDSET X

Press qCID or pDIR to scroll to >Intercom, then press

 

 

MENU/SELECT. Choose from the options below.

 

 

•

If you have a 2-handset system, your handset screen

 

 

HANDSET X

 

shows Calling other handset.

•

If you have more than 2 handsets, your screen shows

is calling

 

 

 

INTERCOM TO: Use the dialing keys to enter a specific

 

 

 

handset number (1-9for handsets 1-9, TONE

 

and 0-2

 

 

 

 

 

 

 

for handsets 10-12, or TONE

 

and # for all handsets), or

 

Intercom

 

 

 

press qCID or pDIR to scroll to the desired handset

 

 

 

 

and press MENU/SELECT. Your handset screen shows

 

 

 

 

Calling HANDSET X or Calling all handsets.

 

12/02

11:35AM

The other handset(s) rings and shows either Other

 

 

 

 

 

 

handset is calling or HANDSET X is calling (HANDSET represents the

handset name, X represents the handset number).

 

 

2. To answer the intercom call, press PHONE/FLASH, /SPEAKER�

or any

dialing key (0-9, TONE , or #) on any called handset. Both handsets now show Intercom.

3.To end the intercom call, one party presses OFF/CANCEL, or places the handset back in the telephone base or charger. The other party hears 4 beeps. Both handsets display Intercom ended.

NOTES:

• Before the intercom call is answered, you can cancel it by pressing OFF/CANCEL.

•If the called handset is not answered within 100 seconds, or if it is in the directory or caller ID log, or is on a call, or is out of range, the calling handset shows No answer. Try again.

•Pressing OFF/CANCEL or MUTE/DELETE temporarily silences the intercom ringer.

•You can only use one pair of handsets to make intercom calls at a time.

Answer an incoming call during an intercom call

If you receive an incoming outside call during an intercom call, there is a 2-beep call waiting tone.

•To answer the call, press PHONE/FLASH. The intercom call ends automatically. The party on the intercom call hears 4 beeps. Other system handsets can also answer the incoming call by pressing PHONE/FLASH.

•To end the intercom call without answering the incoming call, press

OFF/CANCEL.26

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Complete user’s manual Congratulations Parts checklist Abridged user’s manualTable of contents Directory Index QCID/VOLUME Quick reference guide handsetMain menu Quick reference guide telephone base RepeatInstallation Avoid placing the telephone base too close toCharger installation Telephone base and charger installationTelephone base installation Battery installation and charging StepCharge light Step Installation options Tabletop to wall mount installationWall mount to tabletop installation See Telephone base and charger installation onHandset settings SettingRinger volume Ringer toneSet date/time LCD language Press MENU/SELECT to choose LCD languageSet English/Français/Español as LCD language? Caller ID announceSet speed dial voicemail number To set your voicemail numberTo manually turn off the new voicemail indicators Voicemail visual message waiting indicatorClear voicemail indicator Rename handset Key toneTo set the home area code Use caller ID to automatically set date and timeHome area code Website Dial modeTo set the dial mode Handset operation Speakerphone Last number redialTo view the 10 most recently dialed numbers To delete a numberEqualizer Options while on calls To access the directory while on a call To access the caller ID log while on a callTo access the redial list while on a call Chain dialingPress MENU/SELECT to choose Transfer Temporary tone dialingBlind transfer Multiple handset use Handset locatorTo start the paging tone To stop the paging toneIntercom Shows Calling other handsetCalling Handset X or Calling all handsets Answer an incoming call during an intercom callCall transfer using intercom To transfer or share an outside call using intercomPTT call to a single handset Push-to-talk PTTTurn PTT on or off To call a group of handsets Connecting to groupPTT call to a group of handsets Press and hold PTT to talk, press Intercom Answer a PTT callChange a one-to-one PTT call to an intercom call End or leave a PTT call Answer an incoming call during PTTMake an outgoing call during PTT Capacity About the directoryShared directory Create directory entries Create a new directory entryAdd a predialed telephone number to the directory Search by name Review the directoryReview directory entries Dial, delete or edit directory entries Display dialDelete a directory entry Edit a directory entryReassign a speed dial number Speed dialAssign a speed dial number Delete a speed dial number About caller ID Information about caller ID with call waitingHow the caller ID history caller ID log works Missed new call indicatorCaller ID history Review the caller ID history Caller ID operationMemory match View dialing options Dial a caller ID log entryDelete caller ID log entries To delete an entry Press MUTE/DELETE to delete the shown entrySave a caller ID log entry to the directory Reasons for missing caller ID information On-screen message ReasonAnswering system settings AnnouncementTo play your current outgoing announcement To record a new outgoing announcementAnswer on/off Using a handsetTo delete your outgoing announcement To change the setting Call screeningPress MENU/SELECT to select Call screening Number of ringsRemote access code To change the remote access codeMessage alert tone Message recording timeAbout the answering system Answering system and voicemail indicatorsUsing the answering machine and voicemail together Call screening at the telephone base Message capacityVoice prompts Call screening at the handset Call interceptBase ringer Temporarily turning off the message alert toneWhen messages are playing on the telephone base Message playbackTo listen to messages at the telephone base To listen to messages on a cordless handsetWhen messages are playing on the handset Delete all old messagesTo delete all old messages on the telephone base To delete all old messages on the handsetPlay back a memo Recording and playing memosRecord a memo Base message counter displays Message counter displaysTo remotely reach your answering system Remote accessRemote commands Remote access See manual Adding and registering handsets/headsetsRegister a handset to your telephone base Deregistering handsets Alert tones and lights Screen iconsHandset alert tones Telephone base tonesLights USEHandset display screen messages Screen display messagesTransfer to Troubleshooting My telephone doesn’t work at allCannot get a dial tone Cannot dial outMy cordless handset isn’t performing normally Batteries do not hold a chargeMy cordless handset does not ring when I receive a call Experience poor sound quality when using the speakerphoneHear other calls while using my phone My calls cut in and out while I’m using my cordless handset System does not receive caller ID when on a call Charge light is offMy caller ID isn’t working Incomplete messagesSystem does not record messages System does not respond to remote commandsSystem does not answer after the correct number of rings Outgoing announcement is not clear Cannot retrieve voicemail messagesCommon cure for electronic equipment Maintenance Cleaning your telephoneTaking care of your telephone Avoid waterImportant safety information Safety informationEspecially about cordless telephones FCC Part 68 and Acta Industry CanadaFCC Part Limited warranty Call 1 800 222-3111. In Canada, dial 1 866How do you get warranty service? Technical specifications Operation Operating timeIndex Index Remote access wallet card Action Remote command
Top Page Image Contents