AT&T CL81301, CL82401, CL82601, CL82101 Intercom, Answer an incoming call during an intercom call

Page 31

Multiple handset use

Intercom

Use the intercom feature for conversations between two handsets. This feature is only available if you have at least two system handsets. Intercom is not available for the CL82101 model. You can buy accessory handsets (AT&T model CL80101) to expand your system.

Use a handset to initiate intercom calls and transfer calls.

1.Press MENU/SELECT in idle mode to enter the main menu. Press qCID or pDIR to scroll to >Intercom, then press MENU/SELECT. Choose from the options below.

•If you have a two-handset system, your handset screen shows Calling other handset.

•If you have more than two handsets, your screen shows INTERCOM TO: Use the dialing keys to enter a specific handset number (1-9for handsets 1-9, TONE and 0 for handset 10, TONE and 1 for handset 11, TONE and 2 for handset 12, or TONE and # for all handsets), or press qCID or pDIR to scroll to the desired handset and press MENU/SELECT. Your handset screen shows Calling HANDSET X or Calling all handsets.

Calling

other handset

Other handset

is calling

Intercom

12/02 11:35AM

The other handset(s) rings and shows either Other handset is calling or HANDSET X is calling (HANDSET represents the handset name, X represents the handset number).

2.To answer the intercom call, press PHONE/FLASH, /SPEAKER� or any dialing key (0-9, TONE , or #) on any called handset. Both handsets now show Intercom.

3.To end the intercom call, one party presses OFF/CANCEL, or places the handset back in the telephone base or charger. The other party hears four beeps. Both handsets display Intercom ended.

NOTES:

• Before the intercom call is answered, you can cancel it by pressing OFF/CANCEL.

•If the called handset is not answered within 100 seconds, or if it is in the directory or caller ID log, or is on a call, or is out of range, the calling handset shows No answer. Try again.

•Pressing OFF/CANCEL or MUTE/DELETE temporarily silences the intercom ringer.

•You can only use one pair of handsets to make intercom calls at a time.

Answer an incoming call during an intercom call

If you receive an incoming outside call during an intercom call, there is a two-beep call waiting tone.

•To answer the call, press PHONE/FLASH. The intercom call ends automatically. The party on the intercom call hears four beeps. Other system handsets can also answer the incoming call by pressing PHONE/FLASH.

•To end the intercom call without answering the incoming call, press OFF/CANCEL.

25

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CL82101/CL82201/CL82301 CL82351/CL82401/CL82451 Congratulations Parts checklist CL82101/CL82201/CL82301 CL82351/CL82401/CL82451 Table of contentsDirectory Index Quick reference guide handset QCID/VOLUMEMain menu Answer on Quick reference guide telephone baseAvoid placing the telephone base too close to InstallationTelephone base installation Telephone base and charger installationCharger installation Step Battery installation and chargingCharge light Step Tabletop to wall mount installation Installation optionsSee Telephone base and charger installation on Wall mount to tabletop installationSetting Handset settingsRinger tone Ringer volumeSet date/time Caller ID announce Press MENU/SELECT in idle mode to enter the main menuLCD language Press MENU/SELECT to choose LCD languageTo manually turn off the new voicemail indicators Voicemail visual message waiting indicatorClear voicemail indication Key tone Rename handsetHome area code Use caller ID to automatically set date and timeTo set the home area code To set the dial mode Dial modeWebsite Handset operation To redial a number SpeakerphoneLast number redial To view the 10 most recently dialed numbersEqualizer Options while on calls Chain dialing To access the directory while on a callTo access the caller ID log while on a call To access the redial list while on a callBlind transfer Temporary tone dialingPress MENU/SELECT to choose Transfer To stop the paging tone Multiple handset useHandset locator To start the paging toneAnswer an incoming call during an intercom call IntercomTo transfer or share an outside call using intercom Call transfer using intercomTurn PTT on or off Push-to-talk PTTPTT call to a single handset PTT call to a group of handsets Connecting to groupTo call a group of handsets Change a one-to-one PTT call to an intercom call Answer a PTT callPress and hold PTT to talk, press Intercom Make an outgoing call during PTT Answer an incoming call during PTTEnd or leave a PTT call Shared directory About the directoryCapacity Create a new directory entry Create directory entriesAdd a predialed telephone number to the directory Review directory entries Review the directorySearch by name Edit a directory entry Dial, delete or edit directory entriesDisplay dial Delete a directory entryAssign a speed dial number Speed dialReassign a speed dial number Delete a speed dial number Make a call using speed dialInformation about caller ID with call waiting About caller IDCaller ID history Missed new call indicatorHow the caller ID history caller ID log works Memory match Caller ID operationReview the caller ID history Press MUTE/DELETE to delete the shown entry View dialing optionsDial a caller ID log entry Delete caller ID log entries To delete an entrySave a caller ID log entry to the directory On-screen message Reason Reasons for missing caller ID informationTo record a new outgoing announcement Answering system settingsAnnouncement To play your current outgoing announcementTo delete your outgoing announcement Using a handsetAnswer on/off Number of rings To change the settingCall screening Press MENU/SELECT to select Call screeningTo change the remote access code Remote access codeMessage recording time Message alert toneUsing the answering machine and voicemail together Answering system and voicemail indicatorsAbout the answering system Voice prompts Message capacityCall screening at the telephone base Base ringer Call interceptTemporarily turning off the message alert tone To listen to messages on a cordless handset When messages are playing on the telephone baseMessage playback To listen to messages at the telephone baseTo delete all old messages on the handset When messages are playing on the handsetDelete all old messages To delete all old messages on the telephone baseRecord a memo Recording and playing memosPlay back a memo Message counter displays Base message counter displaysRemote commands Remote accessTo remotely reach your answering system Remote access Register a handset to your telephone base Adding and registering handsetsPress and hold /HANDSET Locator on Deregistering handsetsTelephone base tones Alert tones and lightsScreen icons Handset alert tonesUSE LightsScreen display messages Handset display screen messagesTransfer to Cannot dial out TroubleshootingMy telephone doesn’t work at all Cannot get a dial toneBatteries do not hold a charge My cordless handset isn’t performing normallyHear other calls while using my phone Experience poor sound quality when using the speakerphoneMy cordless handset does not ring when I receive a call My calls cut in and out while I’m using my cordless handset Incomplete messages System does not receive caller ID when on a callCharge light is off or blinking My caller ID isn’t workingSystem does not answer after the correct number of rings System does not respond to remote commandsSystem does not record messages Cannot retrieve voicemail messages Outgoing announcement is not clearCommon cure for electronic equipment Avoid water MaintenanceCleaning your telephone Taking care of your telephoneSafety information Important safety informationEspecially about cordless telephones Industry Canada FCC Part 68 and ActaFCC Part Call 1 800 222-3111. In Canada, dial 1 866 Limited warrantyHow do you get warranty service? Operation Operating time Technical specificationsIndex Index Action Remote command Remote access wallet card
Related manuals
Manual 33 pages 44.08 Kb
Top Page Image Contents