AT&T CL82101 PTT call to a group of handsets, To call a group of handsets, Connecting to group

Page 34

Multiple handset use

Push-to-talk (PTT)

2.Press and hold PUSH TO TALK on your handset. A chirp indicates your microphone is on. Speak towards the handset. Your voice is broadcast to the destination handset.

While you are speaking, your handset screen shows PTT To handset: X.

PTT To

handset: X

3.Release PUSH TO TALK after speaking. Both handsets beep once again. After the handsets beep, you can press and hold PUSH TO TALK to continue speaking or the destination handset can respond (see Answer a PTT call on page 29).

4.To end the PTT call, press OFF/CANCEL or place the handset in the telephone base or charger. The handset screen shows Push to talk Ended for a few seconds.

PTT call to a group of handsets

When there are multiple handsets registered to the phone system, PTT supports one-to-group calls. PTT supports a maximum of one-to-four calls when two to five handsets are registered, and a maximum of one-to-three calls when six or more handsets are registered. The first four registered handsets will be able to use this feature. Other handsets can only use PTT for one-to-one calls.

To call a group of handsets:

1.You have three ways to call a group of handsets. When the handset is not in use:

•Press and hold PUSH TO TALK until your handset screen shows

Connecting to group...

•Press PUSH TO TALK. Press qCID or pDIR to choose Group. Press MENU/SELECT or press and hold PUSH TO TALK until your handset screen shows Connecting to group...

•Press PUSH TO TALK. Press TONE and # (pound key). The screen shows Connecting to group...

When the connection is made, both the caller and the destination parties hear a beep. The speakerphones on all other handsets automatically activate.

2.You need to press and hold PUSH TO TALK when you want to speak. Speak towards the handset. Your voice is broadcast to all eligible handsets.

3.Release PUSH TO TALK after speaking.

4.Any extension can reply (see Answer a PTT call on page 29).

NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.

28

Image 34

Contents CL82101/CL82201/CL82301 CL82351/CL82401/CL82451 Congratulations Parts checklist Table of contents CL82101/CL82201/CL82301 CL82351/CL82401/CL82451Directory Index QCID/VOLUME Quick reference guide handsetMain menu Quick reference guide telephone base Answer onInstallation Avoid placing the telephone base too close toTelephone base installation Telephone base and charger installationCharger installation Battery installation and charging StepCharge light Step Installation options Tabletop to wall mount installationWall mount to tabletop installation See Telephone base and charger installation onHandset settings SettingRinger volume Ringer toneSet date/time Press MENU/SELECT to choose LCD language Press MENU/SELECT in idle mode to enter the main menuLCD language Caller ID announceTo manually turn off the new voicemail indicators Voicemail visual message waiting indicatorClear voicemail indication Rename handset Key toneHome area code Use caller ID to automatically set date and timeTo set the home area code To set the dial mode Dial modeWebsite Handset operation To view the 10 most recently dialed numbers SpeakerphoneLast number redial To redial a numberEqualizer Options while on calls To access the redial list while on a call To access the directory while on a callTo access the caller ID log while on a call Chain dialingBlind transfer Temporary tone dialingPress MENU/SELECT to choose Transfer To start the paging tone Multiple handset useHandset locator To stop the paging toneIntercom Answer an incoming call during an intercom callCall transfer using intercom To transfer or share an outside call using intercomTurn PTT on or off Push-to-talk PTTPTT call to a single handset PTT call to a group of handsets Connecting to groupTo call a group of handsets Change a one-to-one PTT call to an intercom call Answer a PTT callPress and hold PTT to talk, press Intercom Make an outgoing call during PTT Answer an incoming call during PTTEnd or leave a PTT call Shared directory About the directoryCapacity Create directory entries Create a new directory entryAdd a predialed telephone number to the directory Review directory entries Review the directorySearch by name Delete a directory entry Dial, delete or edit directory entriesDisplay dial Edit a directory entryAssign a speed dial number Speed dialReassign a speed dial number Make a call using speed dial Delete a speed dial numberAbout caller ID Information about caller ID with call waitingCaller ID history Missed new call indicatorHow the caller ID history caller ID log works Memory match Caller ID operationReview the caller ID history Delete caller ID log entries To delete an entry View dialing optionsDial a caller ID log entry Press MUTE/DELETE to delete the shown entrySave a caller ID log entry to the directory Reasons for missing caller ID information On-screen message ReasonTo play your current outgoing announcement Answering system settingsAnnouncement To record a new outgoing announcementTo delete your outgoing announcement Using a handsetAnswer on/off Press MENU/SELECT to select Call screening To change the settingCall screening Number of ringsRemote access code To change the remote access codeMessage alert tone Message recording timeUsing the answering machine and voicemail together Answering system and voicemail indicatorsAbout the answering system Voice prompts Message capacityCall screening at the telephone base Base ringer Call interceptTemporarily turning off the message alert tone To listen to messages at the telephone base When messages are playing on the telephone baseMessage playback To listen to messages on a cordless handsetTo delete all old messages on the telephone base When messages are playing on the handsetDelete all old messages To delete all old messages on the handsetRecord a memo Recording and playing memosPlay back a memo Base message counter displays Message counter displaysRemote commands Remote accessTo remotely reach your answering system Remote access Adding and registering handsets Register a handset to your telephone baseDeregistering handsets Press and hold /HANDSET Locator onHandset alert tones Alert tones and lightsScreen icons Telephone base tonesLights USEHandset display screen messages Screen display messagesTransfer to Cannot get a dial tone TroubleshootingMy telephone doesn’t work at all Cannot dial outMy cordless handset isn’t performing normally Batteries do not hold a chargeHear other calls while using my phone Experience poor sound quality when using the speakerphoneMy cordless handset does not ring when I receive a call My calls cut in and out while I’m using my cordless handset My caller ID isn’t working System does not receive caller ID when on a callCharge light is off or blinking Incomplete messagesSystem does not answer after the correct number of rings System does not respond to remote commandsSystem does not record messages Outgoing announcement is not clear Cannot retrieve voicemail messagesCommon cure for electronic equipment Taking care of your telephone MaintenanceCleaning your telephone Avoid waterImportant safety information Safety informationEspecially about cordless telephones FCC Part 68 and Acta Industry CanadaFCC Part Limited warranty Call 1 800 222-3111. In Canada, dial 1 866How do you get warranty service? Technical specifications Operation Operating timeIndex Index Remote access wallet card Action Remote command

Related manuals

Manual 33 pages 44.08 Kb