AT&T 900 MHz user manual Telephone MEMORY/DIRECTORY, Store a Number in Memory

TELEPHONE MEMORY/DIRECTORY

You can store up to 10 telephone numbers and names in memory using the handset. Your entries will be saved in the event of a power failure. You can dial memory/directory numbers from the handset or from the base.

When you receive a call from a number you’ve stored in memory, and you subscribe to Caller ID service, the screen displays the name information as you’ve stored it, not as the service sends it (see “Memory Match” on page 38 in CALLER ID OPERATION). You can also record announcements to be played at the base when a call is received from a telephone number or call type you program (see”Talking Caller ID Feature Setup” on page 15 in FEATURE SETUP). Additionally, the phone alerts you to calls from priority numbers you’ve stored in memory with a special Priority Ring.

Store a Number in Memory

1Make sure the phone is off ( is not displayed).

2Press U.

3 Use the softkey to select DIR.

MENU

CALL-ID DIR

4Select MEM.

5Select ADD.

DIRECTORY

VIEW ADD

6Enter the number you want to store (up to 24 digits)

— OR —

Select REDIAL (if available) to store the last number dialed.

7Select DONE.

8Store a name with the number by following the directions on page 26

— OR —

Select DONE if you don’t want to store a name.

9Enter a memory location from 01-10.

10Select DONE.

ENTER NUMBER: REDIAL

ENTER NAME: DONE

25