MicroNet Technology SP5052A/S, SP5054A/S user manual System Configuration

Page 10

Parameter Description:

zType: Show the type of this port. There are only one types of this gateway. (SP5052A/S / SP5054A/S will show the FXS and FXO type. It can not be changed.)

zHunting Group: Define the group number of this port. When the port is busy, the call could be transferred to another port in the same group.

zHotline: Enable or Disable the hotline mode. The hotline mode will be enabled if you enter the hotline number. The default setting is disabled.

zFwd. Type: Forward the call to IP. Forward type: 0: disable, 1: uncondition, 2:busy

zFwd. Number: destination number to which the call is forwarded

zRegistration: To show the gateway registered on the Proxy Server or not.

zStatus: To show the port is busy or ready.

1.5 System Configuration

There are some parameters in the system configurations, please get more detail as following.

9

Image 10

Contents User’s Manual Model No. SP5052A/S, SP5054A/STable of Contents Page Web configuration Start to Configure Network InterfacePage SIP Config Page Security Config Line ConfigurationSystem Configuration Voice Setting For Advanced User Tone Setting Phone Book Page Prefix Configuration Page Routing Table FXO FXO Password IP Packet ToSPassword ROM Upgrade Flash CleanReboot System Commit DataCommand list Console AccessPage Telnet Help Debug QuitParameters Usage Flash RebootCommit Usr/config$ ifaddr LAN information and configuration Usage IfaddrPing TimeResponsed Sysconf No ResponsedParameter Usages Set as11 sip Security Parameters UsageLine Route Example Call out from FXO LineNONE0/GROUP1/ALL2 Prefix Pause Pbook Name, ip, or e164 Phonebook RulesVoice Display voice codec information and configuration Good condition, smaller sending packet size is Tone FxopwdRecord Page DSP Test Code Procedures of recording the disconnect tone According to the result, enter the Freq. into Tone table Page 【Example-2】 Page 22 tos 23 ptSelective Retransmission 24 romMultiple Retransmission Attempts Passwd Auth Setmac