NONE0/GROUP1/ALL2 | MicroNet Technology SP5054A/S, SP5052A/S

(NONE:0/GROUP:1/ALL:2).

Example:

route -add prefix 100 dst 1 e164 1001 min 1 max 3 hunt 1 route -ip dst 1 e164 1001

route -fxo dst 2 e164 x

route -modify 1 prefix 100 dst 2 e164 1001 min 1 max 3 hunt 1

route -delete 1
---------------------------------------------------------------
Parameter Usages:
-print	print out all routing table information
-add	add a routing rule in routing table. User can add less than 50
	rules. (route –add prefix "prefix number "dst" destination port
	type "e164" e.164 number of port "min" minimum digits
	needed "max" maximum digits can't be exceeded")
-delete	delete a routing rule in routing table (route –delete "index of
	routing rule")
-modify	modify a routing rule in routing table. (route –modify "index of
	routing rule" prefix “prefix number "dst"destination port type
	"e164" e.164 number of port "min" minimum digits needed
	"max" maximum digits can't be exceeded")
-ip	create routing table for incoming call from IP side. (route –ip
	dst “destination port type” e164 "e.164 number of port")
-fxo	create routing table for incoming call from FXO Lines.
	(route –fxo dst “destination port type” e164 "e.164 number of
	port")
prefix	prefix of dialed number
dst	destination port, 1 means FXO Lines
	2 means IP side
	x means no determinate number.
e164	destination e.164 number.
min	minimum digits needed.
max	maximum digits needed.
hunt	set hunt method for busy forward.
	0 means no hunting,
	1 means hunting method follows the rule of [line],
	2 means hunting method is to hunt between all ports in the
	same type.