MicroNet Technology SP5052A/S, SP5054A/S user manual Voice

Page 42

“82265699”. Pleased be noted that “0” is eliminated from Micronet FXO Gateway itself.

Note:

1.Because of above characteristics, users have to take care of the number plan very well to avoid the numbering conflict. If users already defined “0” for specific trunk Gateway, other terminal started with “0” shall be avoided, or the number will be routed to the trunk Gateway defined “0”.

2.If user wants to set 2 sets of similar e164 such as 123 and 1234, please be careful configure 123 first, or it may cause problem when user dial 1234, Micronet FXO Gateway may dials out IP address of 123.

3.

(1)If called party is FXO product, please set e164 of pbook as e.164 of called party, and remember to set sysconf –drule in_drop “e.164”(refer to 5.12.)in called party.

(2)If called party is FXS product, please set e164 of pbook as prefix of called party, when dialing to different line of FXS product, please dial line number.

2.18[voice]

The voice command is associated with the audio setting information. There are four voice codecs supported by Micronet SP5052A/S / SP5054A/S Gateway.

---------------------------------------------------------------

usr/config$ voice

Voice codec setting information and configuration Usage:

voice [-send [G723 ms] [G729 ms] [G729A ms] [G729B ms] [G729AB ms] [G711U ms] [G711A ms] ]

[-volume line [voice level] [input level] [dtmf level]]

41

Image 42
Contents User’s Manual Model No. SP5052A/S, SP5054A/STable of Contents Page Web configuration Start to Configure Network InterfacePage SIP Config Page Security Config Line ConfigurationSystem Configuration Voice Setting For Advanced User Tone Setting Phone Book Page Prefix Configuration Page Routing Table FXO FXO Password IP Packet ToSPassword ROM Upgrade Flash CleanReboot System Commit DataCommand list Console AccessPage Telnet Help Quit DebugParameters Usage Reboot FlashCommit Usr/config$ ifaddr LAN information and configuration Usage IfaddrTime PingResponsed Sysconf No ResponsedParameter Usages Set as11 sip Security Parameters UsageLine Route Example Call out from FXO LineNONE0/GROUP1/ALL2 Prefix Pause Pbook Name, ip, or e164 Phonebook RulesVoice Display voice codec information and configuration Good condition, smaller sending packet size is Tone FxopwdRecord Page DSP Test Code Procedures of recording the disconnect tone According to the result, enter the Freq. into Tone table Page 【Example-2】 Page 22 tos 23 pt24 rom Selective RetransmissionMultiple Retransmission Attempts Passwd Auth Setmac