MicroNet Technology SP5054A/S, SP5052A/S user manual FXO Password, IP Packet ToS

Page 19

1.11FXO Password

You will get the IVR if you make calls from PSTN side. The IVR will ask you the password you set, and you could make other calls to IP side if the password you type is correct. Please press the FXO Password button to configure the password

Note:

This function is only for the calls from the PSTN side. It’s not ready for the IP side as so far.

1.12IP Packet ToS

The Type of Service needs worked with the network router supported. The router will check all the packets if it supports the TOS function. There is a field in the packet for the TOS value. This WEB is for users to configure

18

Image 19

Contents Model No. SP5052A/S, SP5054A/S User’s ManualTable of Contents Page Web configuration Network Interface Start to ConfigurePage SIP Config Page Line Configuration Security ConfigSystem Configuration Voice Setting For Advanced User Tone Setting Phone Book Page Prefix Configuration Page Routing Table FXO IP Packet ToS FXO PasswordPassword Flash Clean ROM UpgradeCommit Data Reboot SystemConsole Access Command listPage Telnet Help Debug QuitParameters Usage Flash RebootCommit Ifaddr Usr/config$ ifaddr LAN information and configuration UsagePing TimeResponsed No Responsed SysconfSet as Parameter Usages11 sip Parameters Usage SecurityLine Example Call out from FXO Line RouteNONE0/GROUP1/ALL2 Prefix Pause Pbook Phonebook Rules Name, ip, or e164Voice Display voice codec information and configuration Good condition, smaller sending packet size is Fxopwd ToneRecord Page DSP Test Code Procedures of recording the disconnect tone According to the result, enter the Freq. into Tone table Page 【Example-2】 Page 23 pt 22 tosSelective Retransmission 24 romMultiple Retransmission Attempts Passwd Setmac Auth