MicroNet Technology SP5054A/S, SP5052A/S user manual Network Interface, Start to Configure

Page 5

Step 3. Start to Configure

Most of all commands displayed in console / telnet are transfer to web interface. The most important commands are Network Interface, SIP Config and Reboot System. The method is as the same as command mode.

1.1 Network Interface

Users have to configure the Network configurations in this page. This gateway will be work while it is connecting with the internet network. Please get more info from the following descriptions. (See figure 3.1)

Image 5

Contents Model No. SP5052A/S, SP5054A/S User’s ManualTable of Contents Page Web configuration Network Interface Start to ConfigurePage SIP Config Page Line Configuration Security ConfigSystem Configuration Voice Setting For Advanced User Tone Setting Phone Book Page Prefix Configuration Page Routing Table FXO IP Packet ToS FXO PasswordPassword Flash Clean ROM UpgradeCommit Data Reboot SystemConsole Access Command listPage Telnet Help Parameters Usage QuitDebug Commit RebootFlash Ifaddr Usr/config$ ifaddr LAN information and configuration UsageResponsed TimePing No Responsed SysconfSet as Parameter Usages11 sip Parameters Usage SecurityLine Example Call out from FXO Line RouteNONE0/GROUP1/ALL2 Prefix Pause Pbook Phonebook Rules Name, ip, or e164Voice Display voice codec information and configuration Good condition, smaller sending packet size is Fxopwd ToneRecord Page DSP Test Code Procedures of recording the disconnect tone According to the result, enter the Freq. into Tone table Page 【Example-2】 Page 23 pt 22 tosMultiple Retransmission Attempts 24 romSelective Retransmission Passwd Setmac Auth