MicroNet Technology SP5054A/S, SP5052A/S user manual Command list, Console Access

Page 23

2. Command list

Command Line user interface is provided via out-of-band console access and telnet.

Console Access

yLaunch the HyperTerminal program, then the following windows pop-up on the screen. (START – Program files – Accessories – Communication – HyperTerminal)

yDefine a name such as ‘SP5052A’ for this new connection.

yAfter pressing OK button, the next window popping up is necessary to connect choose COM Port.

Image 23

Contents Model No. SP5052A/S, SP5054A/S User’s ManualTable of Contents Page Web configuration Network Interface Start to ConfigurePage SIP Config Page Line Configuration Security ConfigSystem Configuration Voice Setting For Advanced User Tone Setting Phone Book Page Prefix Configuration Page Routing Table FXO IP Packet ToS FXO PasswordPassword Flash Clean ROM UpgradeCommit Data Reboot SystemConsole Access Command listPage Telnet Help Parameters Usage QuitDebug Commit RebootFlash Ifaddr Usr/config$ ifaddr LAN information and configuration UsageResponsed TimePing No Responsed SysconfSet as Parameter Usages11 sip Parameters Usage SecurityLine Example Call out from FXO Line RouteNONE0/GROUP1/ALL2 Prefix Pause Pbook Phonebook Rules Name, ip, or e164Voice Display voice codec information and configuration Good condition, smaller sending packet size is Fxopwd ToneRecord Page DSP Test Code Procedures of recording the disconnect tone According to the result, enter the Freq. into Tone table Page 【Example-2】 Page 23 pt 22 tosMultiple Retransmission Attempts 24 romSelective Retransmission Passwd Setmac Auth