MicroNet Technology SP5052A/S, SP5054A/S user manual Web configuration

Page 4

1. Web configuration

The initial version for HTTPD web management interface provides user to configure easily rather than command operating method through RS-232 /

TELNET.

The configuration function and step is similar with the way through command line. Basically this version is not the finalized version for web interface. Please refer to the manual for more information. Below provide a simple user guide for user to configure via web interface. Next version for HTTPD web management will not like the command format, but friendly interface.

Step 1. Use Web Broswer to Connect Gateway

Step 2. Input the login name and password

Login name: root / administrator

Password: None (just press Enter in default value)

The web interface main screen

3

Image 4

Contents User’s Manual Model No. SP5052A/S, SP5054A/STable of Contents Page Web configuration Start to Configure Network InterfacePage SIP Config Page Security Config Line ConfigurationSystem Configuration Voice Setting For Advanced User Tone Setting Phone Book Page Prefix Configuration Page Routing Table FXO FXO Password IP Packet ToSPassword ROM Upgrade Flash CleanReboot System Commit DataCommand list Console AccessPage Telnet Help Debug QuitParameters Usage Flash RebootCommit Usr/config$ ifaddr LAN information and configuration Usage IfaddrPing TimeResponsed Sysconf No ResponsedParameter Usages Set as11 sip Security Parameters UsageLine Route Example Call out from FXO LineNONE0/GROUP1/ALL2 Prefix Pause Pbook Name, ip, or e164 Phonebook RulesVoice Display voice codec information and configuration Good condition, smaller sending packet size is Tone FxopwdRecord Page DSP Test Code Procedures of recording the disconnect tone According to the result, enter the Freq. into Tone table Page 【Example-2】 Page 22 tos 23 ptSelective Retransmission 24 romMultiple Retransmission Attempts Passwd Auth Setmac