Automatic Digital Code Security
Many cordless telephones operate similarly and on the same frequency. Without digital code security, another Handset could make calls using your Base Unit and telephone line. To avoid unauthorized calls on your phone, a Digital Code feature was added to the XCA4500. This Digital Code is shared only between the Handset and Base Unit. The Code is set automatically when you first use the phone.
To reset the Digital Code, be sure the Handset is on the Base, then:
1.Press INTERCOM on the Base Unit.
Digital Answering System
NEW MESSAGE
0
STOP | REPEAT | PLAY | SKIP |
DELETE ANS ON/OFF OGM | MEMO INTERCOM |
PAG E / F I N D
2.Remove the Handset from the Base Unit, and then set it
down again.
:
29