Uniden XCA4500 Setting the Calling Party Control Switch, Setting the Toll Saver Switch

Setting the Calling Party Control Switch

The Calling Party Control (CPC) switch sets your Answering System to disconnect and reset if the caller hangs up before leaving a message. This prevents your Answering System from using recording time to record a hang up/dial tone message.

Note: It is possible that if someone calls while your outgoing message is playing or when a message is being recorded and you have Call Waiting, that the Answering System will disconnect and reset. To prevent this you can set the CPC switch to off.

CPC

OFF-ON

RING SW PULSE-TONE		CPC	REC TIME RING VOL			RESET
2-5-TS	OFF-ON		ANN-1 OFF-LO-HI	TEL-LINE	DC IN 9V
					+	-

Setting the Toll Saver Switch

The Ring Number/Toll Saver switch allows you to set the number of rings the caller hears before your Answering System answers. You can set the switch to answer after 2 rings or after 5 rings. In the TS (Toll Saver) position, the Answering System answers after two rings if you have messages recorded, and it answers after five rings if there are no messages. So if you call long distance to check your messages, you can hang up after the second ring and not be billed.

RING SW

2-5-TS

RING SW PULSE-TONE		CPC	REC TIME RING VOL			RESET
2-5-TS	OFF-ON		ANN-1 OFF-LO-HI	TEL-LINE	DC IN 9V
					+	-

54