Uniden XCA4500 important safety instructions Charge LED will blink to

Page 30

3. The CHARGE LED will blink to

indicate that the Digital

Security Code is set to one of

NEW MESSAGE

more than 65,000 codes.

IN USE

BATTERY

STOP REPEAT

CHARGE	DELETE	ANS ON/OFF
	DELETE	ANS ON/OFF
POWER

If the Base Unit loses power while the Handset is off the Base, the Digital Code may be erased. When this happens, the Handset will not function. To establish communication between the Handset and Base Unit:

1.Restore power to the Base Unit, and place the Handset back on the Base Unit.

2.The CHARGE LED will blink to indicate that the Digital Security Code is set.

NEW MESSAGE

IN USE

BATTERY

STOP REPEAT

CHARGE

DELETE

ANS ON/OFF

POWER

30

Image 30

Contents Contents Page Important Safety Instructions Page Features IntroductionIncluded with Your XCA4500 Telephone Line Problems Important Electrical ConsiderationsRange Radio Interference More Than One Cordless TelephoneInstallation Selecting a LocationTelephone Line Outlets Connecting the Telephone Cords Applying Power to the Base UnitInstalling the Backup Battery Desk or Tabletop Installation Page Wall Installation Placement of the HandsetStandard Wall Plate Mounting Page Page Direct Wall Mounting Page Page Setting the Handset Retainer Page Setting up Your Phone Installing the Handset Battery PackExtending the Antenna BLK RED Cleaning the Battery Contacts Charging the Handset Battery Pack Initial Battery ChargingLow Battery Indicator Continuous Battery ChargingDuring a Call Standby Mode Setting the Pulse/Tone Switch Adjusting Ringer ControlsHandset Volume Controls Base Volume Controls Automatic Digital Code Security Charge LED will blink to Using Your Phone Making and Receiving CallsChanging Channels, Flash, and Page/Find ChannelsPaging the Base Unit Using the Two-Way IntercomTwo-Way Paging Press Intercom on the Base Unit to answerPaging the Handset Press Intercom on the Base Unit Room Monitor Feature To turn the monitor offProgramming Your Phone Storing a Number in MemoryOnce increases the length of the pause between numbers Storing a Mixed Number with a Pulse System 3300 Storing One-Touch Dialing Numbers Press MDialing a Stored Number Chain DialingErasing a Stored Number Integrated Answering System Answering System Setup Turning the Answering System On/OffHandset Operation To turn the Answeringr System OFF, press Setting the Clock Base OperationPress Handset. r on 30320# Reviewing Time and Day Stamp Setting Your Outgoing Message OGM Preset MessagesBase Operation Recording Your Personal OGM Handset Operation TALK/BATT LOW LED lights orangeMessage replays in the Handset receiver Press Hold Selecting a Preset OGM Digital Answering SystemSetting the Calling Party Control Switch Setting the Toll Saver SwitchUsing the Reset Button Using Your Answering System Playing New MessagesTALK/BATT LOW LED goes off Base Operation Press NEW MessagePlaying a Stored Message Press Play Repeating a Message Press r Press 2 to review your messagesPress 1 at anytime to replay a message Skipping a Message RTo eturn. to Standby, press Press Skip at any time to skip to the next message Deleting a Message Press r . .Handset OperationThen an announcement such as Two messages deleted plays Return to Standby Press Release Memo Intercom Deleting All Messages Message Full Indication Digital AnsweringVoice-Guided Help Menu Press rScreening Incoming Calls Leaving a Memo Message NEW Message LED remains on but doesn’t flash Recording a Telephone Conversation Setting Your PIN Code Remote OperationPress # Press Again to return To Standby.r Using a Touch-Tone Phone Your Answering System automatically returns to Standby Troubleshooting Telephone Troubleshooting ChartProblem Suggestion Answering System Troubleshooting Chart Handset SpecificationsBase Unit Answering SystemXCA4500 Precautions Key OGM Review Repeat Key Play Key Skip Key Message Delete KeyStop Key OGM Record Voice Guided Help Key ? PIN/Security Key #Volume Ringer Volume Select Button L Handset Controls and KeysIntercom Button Ringer Volume SwitchBattery LED Memo ButtonOne Year Limited Warranty Covered under one or more of the following U.S. patents