Uniden XCA4500 important safety instructions Direct Wall Mounting

Page 17

Direct Wall Mounting

If you do not have a standard wall plate, you can mount the XCA4500 directly on a wall. Before mounting your integrated telephone answering device, consider the following:

Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Make sure the wall material is capable of supporting the weight of the Base Unit and Handset.

Use #10 screws with anchoring devices suitable for the wall material where the Base Unit will be placed.

1. Insert two mounting screws

1/5 IN.

 

31516 inches apart. Allow about

 

15 of an inch between the wall

 

and screw heads for mounting

 

the phone.

 

 

3 15/16 IN.

2.Plug the AC Adapter into the Base Unit.

17

Image 17
Contents Contents Page Important Safety Instructions Page Introduction FeaturesIncluded with Your XCA4500 Range Telephone Line ProblemsImportant Electrical Considerations More Than One Cordless Telephone Radio InterferenceTelephone Line Outlets InstallationSelecting a Location Applying Power to the Base Unit Connecting the Telephone CordsInstalling the Backup Battery Desk or Tabletop Installation Page Standard Wall Plate Mounting Wall InstallationPlacement of the Handset Page Page Direct Wall Mounting Page Page Setting the Handset Retainer Page Extending the Antenna Setting up Your PhoneInstalling the Handset Battery Pack BLK RED Cleaning the Battery Contacts Initial Battery Charging Charging the Handset Battery PackDuring a Call Standby Mode Low Battery IndicatorContinuous Battery Charging Handset Volume Controls Setting the Pulse/Tone SwitchAdjusting Ringer Controls Base Volume Controls Automatic Digital Code Security Charge LED will blink to Making and Receiving Calls Using Your PhoneChannels Changing Channels, Flash, and Page/FindTwo-Way Paging Using the Two-Way IntercomPaging the Base Unit Press Intercom on the Base Unit to answerPaging the Handset Press Intercom on the Base Unit To turn the monitor off Room Monitor FeatureStoring a Number in Memory Programming Your PhoneOnce increases the length of the pause between numbers Storing a Mixed Number with a Pulse System 3300 Press M Storing One-Touch Dialing NumbersChain Dialing Dialing a Stored NumberErasing a Stored Number Integrated Answering System Handset Operation Answering System SetupTurning the Answering System On/Off To turn the Answeringr System OFF, press Press Handset. r on Setting the ClockBase Operation 30320# Reviewing Time and Day Stamp Base Operation Setting Your Outgoing Message OGMPreset Messages TALK/BATT LOW LED lights orange Recording Your Personal OGM Handset OperationMessage replays in the Handset receiver Press Hold Digital Answering System Selecting a Preset OGMSetting the Toll Saver Switch Setting the Calling Party Control SwitchUsing the Reset Button Playing New Messages Using Your Answering SystemBase Operation Press NEW Message TALK/BATT LOW LED goes offPlaying a Stored Message Press Play Press r Press 2 to review your messages Repeating a MessagePress 1 at anytime to replay a message Skipping a Message RTo eturn. to Standby, press Press Skip at any time to skip to the next message Press r . .Handset Operation Deleting a MessageThen an announcement such as Two messages deleted plays Return to Standby Press Release Memo Intercom Deleting All Messages Digital Answering Message Full IndicationPress r Voice-Guided Help MenuScreening Incoming Calls Leaving a Memo Message NEW Message LED remains on but doesn’t flash Recording a Telephone Conversation Press # Setting Your PIN CodeRemote Operation Press Again to return To Standby.r Using a Touch-Tone Phone Your Answering System automatically returns to Standby Problem Suggestion TroubleshootingTelephone Troubleshooting Chart Answering System Troubleshooting Chart Base Unit SpecificationsHandset Answering SystemXCA4500 Precautions Stop Key OGM Record Repeat Key Play Key Skip Key Message Delete KeyKey OGM Review Voice Guided Help Key ? PIN/Security Key #Handset Controls and Keys Volume Ringer Volume Select Button LBattery LED Ringer Volume SwitchIntercom Button Memo ButtonOne Year Limited Warranty Covered under one or more of the following U.S. patents