Motorola DR 3000 service manual Test Equipment and Service Aids, Recommended Test Equipment

Chapter 2 Test Equipment and Service Aids

2.1Recommended Test Equipment

The list of equipment contained in Table 2-1 includes most of the standard test equipment required for servicing Motorola repeaters.

Table 2-1. Recommended Test Equipment

Equipment	Characteristic	Example	Application
Service Monitor	Can be used as a	Aeroflex 2975	Frequency/deviation meter and
	substitute for items	(www.aeroflex.com), Motorola	signal generator for wide-range
	marked with an asterisk	R2670, or equivalent	troubleshooting and alignment
	(*)
Digital RMS	100 µV to 300 V	Fluke 179 or equivalent	AC/DC voltage and current
Multimeter*	5 Hz to 1 MHz	(www.fluke.com)	measurements. Audio voltage
	10 Meg Ohm Impedance		measurements
RF Signal	100 MHz to 1 GHz	Agilent N5181A	Receiver measurements
Generator*	-130 dBm to +10 dBM	(www.agilent.com), Ramsey
	FM Modulation 0 kHz to	RSG1000B
	10 kHz	(www.ramseyelectronics.com),
		or equivalent
Oscilloscope*	2 Channel	Leader LS8050	Waveform measurements
	50 MHz Bandwidth	(www.leaderusa.com), Tektronix
	5 mV/div to 20 V/div	TDS1001b
		(www.tektronix.com), or
		equivalent
Power Meter and	5% Accuracy	Bird 43 Thruline Watt Meter	Transmitter power output
Sensor*	100 MHz to 500 MHz	(www.bird-electronic.com) or	measurements
	50 Watts	equivalent
RF Millivolt Meter	100 mV to 3 V RF	Boonton 92EA	RF level measurements
	10 kHz to 1 GHz	(www.boonton.com) or
		equivalent