Nortel Networks 1165E manual Terms you should know

Page 45

Terms you should know

Terms you should know

Attendant

A telephone operator in your organization.

AutoDial

A telephone number programmed on the AutoDial key for one- touch dialing.

Calling Party Name Display

Information appearing on the LCD display screen, such as the caller’s name and telephone number. The system must have CPND enabled.

Category 5 (Cat5)

Cable and associated connecting hardware capable of transmitting at speeds up to 100 MHz, used by 10BaseT, 100BaseT4, 100BaseTX.

Category 5e (Cat5e)

Most Cat5 cable manufactured after 1996 also supports 1000BaseT (GigE) installations, and is designated Cat 5e. Cat5e cable normally has four pairs of copper wire.

Category 6 (Cat6)

Cable and associated connecting hardware capable of transmitting at speeds up to 200 MHz. Designed specifically to support 1000BaseT (Gig Ethernet (GigE)), it is also compatible with 10BaseT, 100BaseT4, and 100BaseTX installations. The cable normally has four pairs of copper wire.

Communication Server 1000

Your office communication system.

45

Image 45

Contents IP Phone 1165E Page October AprilRevision history Contents Contents About the Nortel IP Phone 1165E Basic featuresAbout the Nortel IP Phone 1165E About the Nortel IP Phone 1165E On page 10 shows the IP Phone 1165E Telephone controlsAbout the Nortel IP Phone 1165E About the Nortel IP Phone 1165E About the Nortel IP Phone 1165E About the Nortel IP Phone 1165E Telephone display About the Nortel IP Phone 1165E On page 17 shows an idle LCD screen USB supportSecurity features Call features and Flexible Feature CodesTo change your Scpw Highlight New PasswordMode To turn Password Protection on or offLogging in without Agent ID for basic ACD Agent and supervisor featuresTo log in as an agent Logging in with an Agent ID and MQA login options Logging in using Multiple Queue Assignments for Basic ACDTo log To use Default Login Using Default LoginTo log out Logging outTo answer the call Answering ACD callsTo terminate the call Using Call ForcingUsing Activity code Using Return to Queue on No AnswerTo enable Call Forcing for headset users To record activitiesTo use Emergency Using EmergencyPlacing or answering non-ACD calls Using Not ReadyTo use Not Ready To place a callTo answer a call Contacting your supervisorTo answer a call from your supervisor To answer a call from your supervisor while on another callTo place a call to your supervisor To return to the ACD callTo conference in your supervisor during a call in progress Agent features To use Answer Agent Using Answer AgentUsing Answer Emergency Using the Agent keyUsing Call Agent To use Answer EmergencyTo use Call Agent Using Night Service Using InterflowTo activate Night Service To use InterflowTo deactivate Night Service To transition to Night ServiceTo observe a call Observing a callTo display information on your ACD queue Displaying the queueIndicator Queue status Description To display agent status Displaying agent statusCurrent status of agents Terms you should know Terms you should know Information display Terms you should know Terms you should know Terms you should know Page Page Page Page Page Legal Notice