AT&T TL74358, TL74458, TL74308, TL74408, TL 74208, TL74258 Call screening, Remote access code

Answering system operation

Answering system setup

Call screening

You can turn the call screening feature on or off. Unless you change it, the call screening feature is set to on.

To change the setting:

1.Press SETUP twice. The system will announce “Call screening,” followed by the current setting, and then “To change the setting, press SKIP or REPEAT; to continue setup, press SETUP.”

2.Press SKIP or REPEAT to change between on and off.

3.Press SETUP to save your selection and move to the next menu option.

-OR-

Press PLAY/STOP to save your selection and exit the menu.

Remote access code

To access your answering system remotely from any touch tone phone, you need to enter a two- digit number (10-99). Unless you change it, the remote access code is 19.

To change the remote access code:

1.Press SETUP three times. The system will announce "Remote access code," followed by the current setting, and then "To change the setting, press SKIP or REPEAT; to continue setup, press SETUP."

2.Press SKIP or REPEAT to increase or decrease the remote access code number by one. Press and hold SKIP or REPEAT to increase or decrease the remote access code number by 10.

3.Press SETUP to save your selection and move to the next menu option.

-OR-

Press PLAY/STOP to save your selection and exit the menu.

57