8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 53
BT Studio 3500 – Issue 1 – Edition 2.1
General information | 53 |
Product disposal instructions
The symbol shown here and on the product means that the product is classed as Electrical
or Electronic Equipment and should not be 
disposed with other household or commercial waste at the end of its working life.
The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill.
Product disposal instructions for residential users
When you have no further use for it, please remove any batteries and dispose of them and the product as per your local authority’s recycling processes. For more information please contact your local authority or the retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check the terms and conditions of the purchase contract and ensure that this product is not mixed with other commercial waste for disposal.
Connecting to a switchboard
This telephone may be connected to most types of switchboard, however in the event of any difficulties, consult your switchboard Service Provider.
Dialling mode
Your BT Studio 3500 is set to Tone dialling. Some older switchboards may require Pulse dialling.
To change the dialling mode, see Dial Mode, page 45.
Flash duration
Your BT Studio is set to a Flash duration of 100ms. You cannot change the setting.
Access code and entering a pause
Some internal switchboards may require you to enter an access code (e.g. 9) to get an outside line. So that the switchboard has time to pick up an outside line before the rest of the number is dialled, you may need to add a pause in the dialling sequence. For example: 9 P 0870 605 8047.
1.After the access code, press 
to insert a pause before entering the telephone number. The display shows P.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com