PARTNER® Advanced Communications System
Form F5: Instructions for Pool Access Restrictions
Pool Access Restriction (#315)
By default, access to all lines and pools is set to No Restriction. To change the default, write the line numbers or pool access codes in the appropriate columns, as follows:
Outgoing
Incoming
No
NOTE: Pool Access Restriction for key extensions in Hybrid mode is set to No Access. Pooling and Hybrid mode are available only if you are using PARTNER ACS R2.0 or later.
NOTE: For T1 lines with Direct Inward Dialing, the Pool Access Restriction is ignored (that is, users can receive calls on DID lines and pools that are “Outgoing only” or “No Access”).
Outgoing Call Restriction (#401)
Write “IN” or “LOC” to indicate restrictions for all outgoing calls on all lines at that extension, as follows:
Any available outside lines can still be used to dial numbers on an Allowed Phone Number List assigned to the extension, numbers on the Emergency Phone Number List, or Marked System Speed Dial numbers.
Form F5: Instructions for Pool Access Restrictions
34