Avaya 518-456-161 manual IP address of Notified

Page 46

PARTNER® Advanced Communications System

Required Information	Notes	Sample values	Enter values for current installation

5. VoIP settings	Obtain these settings if your SDSL provider uses VoIP with the Lucent PathStar or other VoIP voice gateway. These settings are in
	addition to the required ATM or Frame Relay settings.

IP address of Notified	IP address of the VoIP gateway	192.168.32.2
Entity1
IP address for MGCP	Media Gateway Control Protocol. This is the IP address	192.168.32.3
signaling1	of the voice PVC on the 1600 DSL; used for signal
	control.

TOS byte value1	Leave at 7 unless specified by SDSL provider.	1-7
IP address for RTP	Real Time Protocol. This is also the IP address of the	192.168.32.3
signaling1	voice PVC on the 1600 DSL; used for controlling the
	voice PVC.

TOS byte value1	Leave at 7 unless specified by SDSL provider.	1-7
6. IP Router Settings	IP router settings apply to the data PVC only.

SDSL (WAN) port	The public address that external routers use to find the	192.168.32.40
address2	1600 DSL module. Select the data PVC when
	configuring.

WAN port subnet mask2	Required regardless of transport protocol.	255.255.255.0
Normal/High priority2	Sets the priority of the data port; leave at normal for data	Normal/High
	PVC; set to high if using MGCP voice (VoIP).

Default route (gateway)	IP address of the ISP. The address to which the router	192.168.32.2
IP address2	sends packets it otherwise does not know how to route.
	NOTE: The netmask for the default route does not
	require a manual setting. The netmask is determined
	automatically.

10/100BaseT Ethernet	Address for the LAN port of the 1600 DSL module.	192.168.32.2
address3

1.Obtained from SDSL provider

2.Obtained from ISP

3.Obtained from customer/LAN VAR

PARTNER® ACS 1600 DSL Module Planning Checklist

38

Image 46

Contents Partner Federal Communications Commission Statement Obtaining Products Page Internet Security-Related Issues General InformationPage Table of Contents Partner Advanced Communications System Table of Contents TOC Form A-Customer Information List in order of priorityService Verification Form a Instructions for Customer InformationForm B-System Configuration Lines Equipment CallAutomated Answer Options Form B Instructions for System Configuration LinesOther Options Column Form C-Extension Settings EXT413 Form C1-Extension Settings Worksheet May be used if Ext. Display is checked on Form CCharacter Codes Letters Numbers Form C Instructions for Extensions Settings Column 7 Button Features Form C-Extension Settings Feature Descriptions Feature DescriptionsCalling activity at the destination extension Feature Descriptions Last Number Feature Descriptions Form D-Auxiliary Equipment Form D Instructions for Auxiliary Equipment Form E-System Configuration Default Settings Question 1 Lines PER Extension Forms F1-F5 System Configuration Lists Form F1-System Speed Dial Form F1 System Speed Dial Supplemental Instructions General GuidelinesTelephone Number Form F2a-Disallowed Lists Disallowed Phone Number Lists #404Form F2b-Allowed Lists Allowed Phone Number Lists #407Disallowed Phone Number Lists #404 Allowed Phone Number Lists #407Form F3-Hunt Groups Hunt Group Extensions #505Hunt Group Extensions 1-6 #505 Form F3 Instructions for Identifying Hunt Group AssignmentsVMS Only Hunt Group Forced Account Code List #409 Form F4-Forced Account CodeForced Account Code List #409 Form F4 Instructions for Forced Account CodesForm F5-Customized Extensions/Pool Access Restrictions Write line numbers or pool accessForm F5-Customized Extensions/Pool Access Restrictions Pool Access Restriction #315 Form F5 Instructions for Pool Access RestrictionsOutgoing Call Restriction #401 Partner ACS 1600 DSL Module Planning Checklist Sdsl activation date1Set Sdsl speed VPI1 IP address of Notified DHCP3 NAT3 Partner Advanced Communications System Worksheet for extended values Partner ACS T1 Module Planning Forms Form G1-T1 Module Parameters Form G1 Instructions for T1 Module Parameters Form G2-T1 Module Line Settings Form G2 Instructions for T1 Module Line Settings Form G3-Direct Inward Dialing did Form G3 Instructions for Direct Inward Dialing did Form G4-Direct Inward Dialing did Mapping Table Did Mapping TableDid Number Column Appendix a Security Notification and Checklist Avaya IncPage Data Network Access Security Partner ACS 1600 DSL Module Security ChecklistSystem Administration Router Configuration Storage