PARTNER® Advanced Communications System
PARTNER® ACS 1600 DSL Module Planning Checklist
Use this job aid to help you collect, organize and record the settings necessary for a PARTNER installation that includes the 1600 DSL module. Always
■ There is a worksheet at the end of this checklist that you can use for settings that will not fit in the table.
■All sample IP addresses used are in the private domain. In most cases, public addresses are required.
Customer: ___________________________________ |
|
|
|
| |
Contact: ____________________________________ | Phone: _______________________ | Email: ___________________________ | |||
Sales person: ________________________________ | Phone: _______________________ | Email: ___________________________ | |||
Installer: ____________________________________ | Phone: _______________________ | Email: ___________________________ | |||
ISP contact: _________________________________ | Phone: _______________________ | Email: ___________________________ | |||
SDSL contact:________________________________ | Phone: _______________________ | Email: ___________________________ | |||
SDSL tech support contact: _____________________ | Phone: _______________________ | Email: ___________________________ | |||
|
|
|
|
|
|
Required Information | Notes |
| Sample values |
| Enter values for current installation |
|
|
|
|
|
|
1. SDSL settings |
|
|
|
|
|
|
|
|
|
| |
SDSL activation date1 | When service will be available at the customer site. |
|
| ||
| NOTE: The SDSL provider should verify SDSL signal |
|
|
| |
| at the customer demarcation point. |
|
|
|
|
|
|
|
|
| |
Voice Gateway1 | The manufacturer connecting the SDSL calls to the | Lucent PathStar, |
|
| |
| PSTN. |
| Copper Com, Jetstream, |
| |
|
|
| Tollbridge |
|
|
|
|
|
| ||
Jitter delay1 | In most cases, the defaults for this setting are | Frame Relay = 17msec; |
| ||
| appropriate. If voice quality is poor, use the sample | ATM = 6msec |
|
| |
| values shown. |
|
|
|
|
|
|
|
|
| |
DSLAM1 | The manufacturer of the SDSL voice and data stream | Lucent Stinger, |
|
| |
| multiplexer. |
| Copper Mountain |
|
|
|
|
|
|
| |
Datalink protocol1 | The transport protocol: ATM or Frame Relay. | ATM, Frame Relay |
|
|
1.Obtained from SDSL provider
2.Obtained from ISP
3.Obtained from customer/LAN VAR
PARTNER® ACS 1600 DSL Module Planning Checklist
35