Avaya 518-456-161 manual NAT3

Page 48

PARTNER® Advanced Communications System

Required Information	Notes	Sample values	Enter values for current installation

Static Binding IP	Links a host to an address using MAC number.	192.168.32.33	See worksheet (if necessary)
address3		00:c0:d5:d4:da:2c
NAT3	Allows multiple LAN hosts to access the Internet behind	E (to enable); D (to
	one public IP address.	disable)

7. Packet filtering needs

Actions to be permitted	Enter rules via the IP Filtering Configuration menu.	Permit HTTP, Deny PING	See worksheet (if necessary)
or denied3
IP-based servers	Obtain IP addresses for all servers that require external	Email 198.168.34.53
supported by customer3	access.	Web 198.168.121.13
8. Routing requirements

Activate RIP3	Optional; Only for more complex networks.	Version 1 Broadcast;
		Version 2 Broadcast;
		Version 2 Multicast

Static routing table	Only used if other routers exist on the network.		See worksheet (if necessary)
entries3
9. Bridging settings	Bridging is a rare configuration that allows the 1600 DSL to support older, in-place LAN protocols, such as AppleTalk. Bridging
	directs information by hardware MAC address rather than IP address.

Bridge Aging
Timer3
Spanning Tree:
Enabled3
Spanning Tree: Port
Priority3
Spanning Tree: Hello
Time3

1.Obtained from SDSL provider

2.Obtained from ISP

3.Obtained from customer/LAN VAR

PARTNER® ACS 1600 DSL Module Planning Checklist

40

Image 48

Contents Partner Federal Communications Commission Statement Obtaining Products Page Internet Security-Related Issues General InformationPage Table of Contents Partner Advanced Communications System Table of Contents TOC Form A-Customer Information List in order of priorityService Verification Form a Instructions for Customer InformationForm B-System Configuration Lines Equipment CallForm B Instructions for System Configuration Lines Automated Answer OptionsOther Options Column Form C-Extension Settings EXT413 Form C1-Extension Settings Worksheet May be used if Ext. Display is checked on Form CCharacter Codes Letters Numbers Form C Instructions for Extensions Settings Column 7 Button Features Form C-Extension Settings Feature Descriptions Feature DescriptionsCalling activity at the destination extension Feature Descriptions Last Number Feature Descriptions Form D-Auxiliary Equipment Form D Instructions for Auxiliary Equipment Form E-System Configuration Default Settings Question 1 Lines PER Extension Forms F1-F5 System Configuration Lists Form F1-System Speed Dial Form F1 System Speed Dial Supplemental Instructions General GuidelinesTelephone Number Form F2a-Disallowed Lists Disallowed Phone Number Lists #404Form F2b-Allowed Lists Allowed Phone Number Lists #407Disallowed Phone Number Lists #404 Allowed Phone Number Lists #407Form F3-Hunt Groups Hunt Group Extensions #505Form F3 Instructions for Identifying Hunt Group Assignments Hunt Group Extensions 1-6 #505VMS Only Hunt Group Forced Account Code List #409 Form F4-Forced Account CodeForced Account Code List #409 Form F4 Instructions for Forced Account CodesForm F5-Customized Extensions/Pool Access Restrictions Write line numbers or pool accessForm F5-Customized Extensions/Pool Access Restrictions Form F5 Instructions for Pool Access Restrictions Pool Access Restriction #315Outgoing Call Restriction #401 Partner ACS 1600 DSL Module Planning Checklist Sdsl activation date1Set Sdsl speed VPI1 IP address of Notified DHCP3 NAT3 Partner Advanced Communications System Worksheet for extended values Partner ACS T1 Module Planning Forms Form G1-T1 Module Parameters Form G1 Instructions for T1 Module Parameters Form G2-T1 Module Line Settings Form G2 Instructions for T1 Module Line Settings Form G3-Direct Inward Dialing did Form G3 Instructions for Direct Inward Dialing did Form G4-Direct Inward Dialing did Mapping Table Did Mapping TableDid Number Column Appendix a Security Notification and Checklist Avaya IncPage Partner ACS 1600 DSL Module Security Checklist System AdministrationData Network Access Security Router Configuration Storage