AT&T 1030, 3070 manual Using PAUSE, STOP, and Flash for Outside Auto Dial Buttons

PROGRAMMING CODES FOR CUSTOM FEATURES

Custom	Dial This	Suggested
Feature	Information	Button Label
Intercom Auto Dial	✱ 6 + lnter-	Person’s Name
	com Code
Outside Auto Dial	✱ 90 + out-	Person’s Name or Telephone
	side Number	Number
	(16-digit max-
	mum)
Primary Cover	✱ 4 + lnter-	Person’s Name or Location
	com Code
Secondary Cover	✱ 5 + lnter-	Person’s Name or Location
	com Code
Loudspeaker Paging	✱ 680	Page All
Page Zone 1	✱ 681	Page Zone 1
Page Zone 2	✱ 682	Page Zone 2
Page Zone 3	✱ 683	Page Zone 3

USING PAUSE, STOP, AND FLASH FOR OUTSIDE AUTO DIAL BUTTONS

An Outside Auto Dial button can store up to sixteen digits. For some types of calls, though, you need to program an automatic pause, stop, or switchhook flash with the number. For example, if your MERLIN system will be working in combination with a PBX system where you have to dial 9 to get an outside line, you must program a pause after the 9 on your MERLIN system Outside Auto Dial button. Or, when you dial an additional long distance service sequence or call in a credit card authoriza- tion code, you need to program an automatic stop.

Follow these steps to program a pause for PBX systems:

1.Label the button.

2.Set the voice terminal to program mode by following the boxed instructions on page 30.

3.Touch the button you want for Outside Auto Dial.

4.Dial ✱ 90.

5.Dial 9.

6.Touch Hold (pause) to program the 1.5-second pause.

7.Dial the outside number you want the button to represent.

8.Slide the T/P switch to the center position to return to normal operation.

34