HTC PDA PHONE II, Andes MB Pre-assembly, Gasket on shielding cover, 72H00411-00, 76H00473-00

Page 22

6.2 Assembling

MB Pre-assembly:

There are 4 items need to be applied to

MB , which are:

1.Insulation tape on lower right corner of MB , as shown on picture. Insulation tape P/N: 76H00469-00

P/N for this insulation tape : 76H00469-00

2.Gasket on shielding cover.

Need to apply 3 gasket on shielding cover.

P/N: 72H00411-00

Remember to insert navigation button to its place.

Gasket

3.Black poron of Send/End button

Next to paste 2 EA Poron (black) aside to

SEND and END switch on MB.

P/N: 76H00473-00

Caution:

This is to focus the brightness of LED on

Send and Receive button

HTC confidential

© 2001, HTC Corporation. All rights reserved.

TOTAL 77 CONT.ON. 23 PAGE NO. 22

Image 22

Contents For PDA Phone Andes APP´D Table of contents 4END Introduction ContainsSpecification of AC Adapter GSM/GPRS Functional BlockGPRS/GSM 400MHzTotal 77 CONT.ON page no Total 77 CONT.ON page no TTE System Block Diagram Main unit Regulatory label on the rear housing of main unit Labeling01 ~ Label exampleTBD Servicing Tools Assembling and Disassembling PDA PhoneTotal 77 CONT.ON page no Total 77 CONT.ON page no Total 77 CONT.ON page no Use tweezers to remove the Vibrator 72H00401-00 Total 77 CONT.ON page no 72H00411-00 MB Pre-assemblyGasket on shielding cover Black poron of Send/End buttonBlack poron for volume button PN of this poron is 76H00483-00Total 77 CONT.ON page no Total 77 CONT.ON page no 72H00339-00 Antenna AssemblyN72H00338-00 FIX Antenna Cover Warranty Seal Security Label77H00083-00 Test Camera Replacement assemby Connector, Back up battery replacement PadProblem Diagnostics List of Test JigsDiagnostic Program Clean Talk TimeHow to select test item Stop on failChecksum Refurbishment Total 77 CONT.ON page no To Main battery To PC Com Port Voltage 2.5 Criteria for Eeprom Block 1 Status Criteria on running Run Down Test Program B2. ProcedureB1. Requirement Capacity ≧ 50 %Current consumption measurement Fixture requirementReady for testing Unit is turn off and no display Single Single dotsBright dots Dark dotsForeign Scratch Or lints Power Off statusAll allowable defect dots Scratch, Object11.RF 11.1RF Test RequirementRF Antenna Spec RF Antenna Test SpecGSM 900 Transmitter Test DCS 1800 Receiver Test OS Upgrade and GSM code Upgrade Execute RUU Next Total 77 CONT.ON page no Done Following is the complete procedure for SD reflash Execute MTTY.exe and set into USB PortSerial V1.02 Following display will be shown on PC display … Then press ENTER, following display will be shown 100% Checksum is OK HTC confidential SD Download Sections=3 Press Power To Flash…… Once it is Done, display will show Classification of Non-Conformity Troubleshooting & Repair －Ａ．Touch Panel Does Not Respond to Screen Tap－B．Buttons Do Not Respond －A．SD Card cannot be used －A．Data Retention related problem －B．Battery discharges quickly even after fully charged －A．No Recorded Sound or Distorted sound Exploded Diagrams & Spare part list Spare part list Spare Part List with Picture 72H00339-00 75H00313-00 Appendix Customer, Retailer MisjudgmentHTC confidential FTP Repair Troubleshooting Guide Flow Total 77 CONT.ON. F page no