User Guide SoundPoint IP 330/320
Connecting Network and Power Source
Use Power over Ethernet (PoE) for network and power source connections unless otherwise directed by your system administrator.
Note | The AC power adapter is a separate, optional accessory. Your system |
| administrator will provide one to you if necessary. |
|
|
Power over Ethernet
Using a regular CAT5 cable (optional accessory from Polycom), the phone can be powered from a PoE (IEEE 802.3af) compliant switch or hub.
To connect the PoE:
•Plug the supplied network cable between the LAN jack on the phone and an available power and data port on the
IEEE802.3af compliant PoE
Hub/Switch/Midspan Unit
| Power Adapter |
| (Optional Accessory) |
Note | The SoundPoint IP 330 has an optional PC connection. The SoundPoint IP 320 |
| does not. This is the only difference between the phones. |
If you want to use the optional PC connection on the SoundPoint IP 330, a separate ferrite clamp (not included) is required. Contact your system administrator.
Connecting the Handset and Optional Headset
To connect the handset and optional headset:
1.Connect the short straight end of the phone cord to the handset and the corresponding longer straight end of the cord to the handset jack on the back of the phone.
1 - 4