Installing SoundPoint® IP 300 SIP
This section provides basic installation instructions and information for obtaining the best performance with the Sound- Point® IP 300 SIP telephone. If you re- quire additional information or assistance with your new telephone, please contact your System Administrator.
The SoundPoint® IP 300 SIP User Guide includes regulatory compliance infor- mation that your System Administrator should review and can also be found at: www.polycom.com
Connecting Network and Power Source
AC Power Option
Connect the supplied Network Cable between the LAN jack on the telephone and the LAN port on the wall or hub/switch device port. Connect the DC plug of the AC wall adapter into the supplied LAN cable as shown.
In-Line Power Option
If the telephone is connected to a compat- ible Ethernet switch that can provide
Cisco™Catalyst™
Power Switch
IEEE 802.3af compliant
2