6
3. Charging
During normal operation, it takes approximately 3 1/2 hours to charge the handset from fully discharged to its full capacity. Place the handset in the charger. When the handset is turned on, the display shows the charging status in line 3. For correct charging be sure the room temperature is between 0°C and 25°C. Do not place the handset in di- rect sunlight. The battery has a built-in heat sensor which will stop charging if the battery temperature is too high. It is necessary to recharge the battery when the display shows “BATTERY LOW”, or if it can not be turned on. The LED flashes at a low frequency while charging and lights constantly when the charging is finished. The display
goes back to normal mode when fully charged. KIRK telecom
❚❚❚❚❚❚❚❚❚ . . . .
When the handset is placed in the charger it will not vibrate, and B-answer is inactive. If the battery is fully dis- charged, up to 10 min. may pass before charging begins and the handset can be turned on. When the charger begins the charging, status is shown in the 3rd line of the display and the LED flashes slowly.
1408 8700-ed9:1408 8700-ed9.qxd 03-10-2008