Clarity E814 manual Using your cordless handset, Audio Tone Settings, To turn on this feature

using your cordless handset

(Purchased Separately)

Audio Tone Settings

Use this feature to change the quality of the audio of the handset to best suit your hearing.

While you are on a call, press TONE repeatedly to select an equalizer setting: Bass, Natural, Treble 1 or Treble 2, (the default setting is Natural). The tone setting remains set until you change it again.

Audio Boost

Use the audio boost feature to enhance the clarity and loudness of your caller’s voice on the handset earpiece – up to 40dB of amplification.

To turn on this feature

1.While you are on a call using the handset earpiece, press AUDIO BOost. The AUDIO BOOST icon appears until you turn off this feature.

2.You must press AUDIO BOOST every time you want to activate the feature.

To turn off this feature

1.Press AUDIO BOost. –OR–

2.Audio boost ends when you switch from the handset earpiece (normal handset use) to the speakerphone.

Note: Audio Boost ends when you end the call. If you end a call when the audio boost feature is on, the handset earpiece listening volume automatically resets to level 1 (the mini- mum setting) for the next call.

Volume Control (earpiece and speakerphone)

During a call

Press <UP/DOWn> to increase or decrease the listening volume. The current setting is shown. When the volume reaches the minimum or maximum setting, you hear two beeps. When you end the call, the setting will remain at the last selected level.

Note: The handset earpiece volume setting (1-5) and speakerphone volume setting (1-6) are independent.

Mute

Use the mute function to turn off the microphone while on a call. You can hear the caller, but the caller does not hear you.

45