using your E814
Clear the voicemail icon on your screen
Note: This feature applies if you have voicemail service from your local phone service pro- vider; it refers to the small envelope icon on your screen.
In Idle:
1.Press <OK/MENU> and <UP/DOWn> to select Settings.
2.Press <OK/MENU> and <UP/DOWn> to select “Clr voicemail”; display shows “Reset VM icon?”
3.Press <OK/MENU> to confirm (or <CLEAR/MUTE> to cancel); display returns to previous menu.
REGISTRATION (Optional cordless handset(s), purchased separately)
IMPORTANT: When you purchase a phone system, all handsets are already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if a handset has become faulty.
You can register additional handsets to have up to five handsets per base unit, with each handset’s number (1 to 5) shown on its display.
To check whether a handset is registered, make sure mains power to the base unit is switched on and the handset is within range. The handset’s display should show its number and the <Antenna icon> should be steadily on. If the display shows “UNREG”, you need to register the handset again using the following process:
On the cordless handset: (Optional purchase)
1.Press <MENU/SELECT> and <UP/DOWn> to select Settings; press
<MENU/SELECT>.
2.Press <UP/DOWn> to select “Register”. Press <MENU/SELECT>. Display shows “Press and hold PAGE button”.
On the base:
3.At the same time, press and hold <PAGE/FLASH> for 4 seconds until the display shows “Registering...”.
4.Handset displays “Registering... Please wait”.
5.When process is finished, handset display shows “Handset registered” briefly, after which it shows “Handset X” (X is the handset number).
26