Panasonic KX-TCD430NZ operating instructions Handset settings, Time alarm, Ringer options

Page 16

Useful Telephone Settings

Handset settings

Time alarm

An alarm will sound for 3 minutes at the set time once or daily.

“ONCE”: The alarm will ring only once.

“REPEAT DAILY”: The alarm will ring at the set time everyday.

“OFF”: Turns this feature off.

Set the time and date beforehand (page 8).

Setting the time of alarm

1Press {j}.

2Press {v} repeatedly to display “SETTING HS”, then press {>}.

3Press {v} repeatedly to display “TIME ALARM”, then press {>}.

4Press {v} repeatedly to display “SET TIME”, then press {>}.

5Enter the desired hour and minute by selecting 2 digits for each (24-hour time entry).

LTo erase a digit, press {C}.

6Press {>}.

7Press {v} repeatedly to select the desired setting, then press {>}.

8Press {ih}.

Note:

LTo stop the alarm, press any dial key.

LWhen in talk or intercom mode, the alarm will not sound until the call has ended.

LIf you select “ONCE”, the setting will be changed to “OFF” after the alarm rings.

Changing the alarm frequency

1Press {j}.

2Press {v} repeatedly to display “SETTING HS”, then press {>}.

3Press {v} repeatedly to display “TIME

ALARM”, then press {>}.

4Press {v} repeatedly to display “SET ALARM”, then press {>}.

5Press {v} repeatedly to select the desired setting, then press {>}.

6Press {ih}.

Ringer options

Ringer volume

You can select the desired ringer volume from off, level 1 to 6 or *6.

1Press {j}.

2Press {v} repeatedly to display “SETTING HS”, then press {>}.

3Press {v} repeatedly to display “RINGER OPT”, then press {>}.

4Press {v} repeatedly to display “RINGER VOL”, then press {>}.

5Press {e} or {v} repeatedly to select the desired volume, then press {>}.

6Press {ih}.

Note:

LIf you set to level 3 to 6 or *6, each ringer will start ringing with lower volume, then gradually increase in volume when receiving a call.

LLevels 6 and *6 are the highest settings. Their ringing methods are slightly different.

LWhen the ringer volume is set to off, the following will be displayed.

Ringer types for external calls, internal calls, paging or alarm

There are 20 ringer types (6 ringers and 14 melody ringers) available for each item. “EXT RINGER”: For external calls

“INT RINGER”: For internal calls

“PAGING”: For paging

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model No. KX-TCD430NZ Telephone Accessory information Included accessoriesAdditional/replacement accessories Model No DescriptionImportant information Location of controls HandsetBase unit Receiver Display Phonebook Talk NavigatorBattery installation Battery chargeBattery strength ConnectionsBattery replacement Turning the power on/offWall mounting Other features To edit a number in the redial list before calling itTo erase numbers in the redial list To store a number from the redial list into the phonebookAnswering calls Handset locatorEditing a stored entry Erasing a stored entryKeys To edit/correct a mistakeMaking calls using the phonebook Making calls using a hot keyHot key quick dial Assigning an entry in the phonebook to a hot key Caller ID service Using toll services from Telecom or another company Call minder Viewing caller information and calling backEditing a caller’s phone number before calling back Erasing caller informationStoring caller information into the phonebook ExampleGuide to handset settings 2nd menu 3rd menu Default settingTime alarm Handset settingsRinger options Selecting the standby mode display Example Selecting the talk mode displayTone options Display optionsCall options Setting call barSelecting the display language Other options Guide to base unit settings Base unit settingsAdjusting ringer volume Setting flash timeSetting pause length Setting call restrictionCancelling a restricted number Turning on/off call restrictionStoring emergency numbers Resetting the base unit to its default settingsChanging stored emergency numbers Operating additional units Registering a handset to a base unitAdditional handsets Additional base unitsCancelling a handset Selecting a base unitSetting all handsets to ring Setting the selected handsets to ringHandset To transfer a call directly without speaking to handsetTroubleshooting Handset beeps intermittently and/or 074 flashes Fully charged the batteries, but 074 still flashesCaller information is not displayed Cannot register a handset to a base unitRF Transmission Power Approx mW Power consumption, Base unit StandbyTechnical information Number of channels 120 DuplexIndex PINPage Customer Support Centre Tel. No 272 Sales Department For your future referenceManufacturer
Top Page Image Contents