Panasonic KX-TCD430NZ operating instructions Important information

Page 4

Preparation

Important information

General

LUse only the power supply included with this product, noted on page 3.

LDo not connect the AC adaptor to any AC outlet other than a standard 220–240 V AC outlet.

LThis product is unable to make calls when:

The portable handset batteries need recharging or have failed.

There is a power failure.

The key lock feature is turned on.

The call bar feature is turned on (only numbers stored as emergency numbers can be called).

LDo not open the base unit or handset (other than to change the batteries).

LThis product should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers.

LCare should be taken that objects do not fall onto, and liquids are not spilled into, the unit. Do not subject this product to excessive smoke, dust, mechanical vibration or shock.

Environment

LDo not use this product near water.

LThis product should be kept away from heat sources such as radiators, cookers, etc. It should also not be placed in rooms where the temperature is less than 5 °C or greater than 40 °C.

LThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is located/installed near the unit and is easily accessible.

Warning:

LTo prevent the risk of electrical shock, do not expose this product to rain or any other type of moisture.

Location

For maximum distance and noise-free operation, place your base unit:

Away from electrical appliances such as TVs, radios, personal computers or other phones.

In a convenient, high and central location.

Battery caution

LWe recommend using the batteries, noted on page 3. Use only rechargeable batteries.

LDo not mix old and new batteries.

LDo not dispose of batteries in a fire, as they may explode. Check local waste management codes for special disposal instructions.

LDo not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

LExercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.

LCharge the batteries in accordance with the information provided in these operating instructions.

Safety caution

The ringer tone is reproduced through the handset receiver. To avoid damage to hearing, we recommend you answer incoming calls before holding the phone to your ear.

4

Image 4
Contents Model No. KX-TCD430NZ Telephone Accessory information Included accessoriesAdditional/replacement accessories Model No DescriptionImportant information Location of controls HandsetBase unit Receiver Display Phonebook Talk NavigatorBattery installation Battery chargeBattery strength ConnectionsBattery replacement Turning the power on/offWall mounting Other features To edit a number in the redial list before calling itTo erase numbers in the redial list To store a number from the redial list into the phonebookAnswering calls Handset locatorEditing a stored entry Erasing a stored entryKeys To edit/correct a mistakeMaking calls using the phonebook Making calls using a hot keyHot key quick dial Assigning an entry in the phonebook to a hot keyCaller ID service Using toll services from Telecom or another companyCall minder Viewing caller information and calling backEditing a caller’s phone number before calling back Erasing caller informationStoring caller information into the phonebook ExampleGuide to handset settings 2nd menu 3rd menu Default settingTime alarm Handset settingsRinger options Selecting the standby mode display Example Selecting the talk mode displayTone options Display optionsCall options Setting call barSelecting the display language Other options Guide to base unit settings Base unit settingsAdjusting ringer volume Setting flash timeSetting pause length Setting call restrictionCancelling a restricted number Turning on/off call restrictionStoring emergency numbers Resetting the base unit to its default settingsChanging stored emergency numbers Operating additional units Registering a handset to a base unitAdditional handsets Additional base unitsCancelling a handset Selecting a base unitSetting all handsets to ring Setting the selected handsets to ringHandset To transfer a call directly without speaking to handsetTroubleshooting Handset beeps intermittently and/or 074 flashes Fully charged the batteries, but 074 still flashesCaller information is not displayed Cannot register a handset to a base unitRF Transmission Power Approx mW Power consumption, Base unit StandbyTechnical information Number of channels 120 DuplexIndex PINPage Customer Support Centre Tel. No 272 Sales Department For your future referenceManufacturer